Schneider Electric Circuit Breaker A9C62440

Manufacturer: Schneider Electric
Designation: Circuit Breaker 40A 4P C TI24
Type: A9C62440
Tripping Characteristic: C
Number of Poles: 4
Rated Current: 40 A
Rated Voltage: 415 V
Rated Short-Circuit Breaking Capacity according to IEC 60947-2: 10 kA
Voltage Type: AC
Frequency: 50..60 Hz
Switched Neutral Conductor: no
Overvoltage Category: 4
Degree of Pollution: 3
Width in Division Units: 6.5
Installation Depth: 44.5 mm
Factory-installed Additional Devices: Remote Drive
Rated Switching Current of Additional Device: 1 A
Rated Voltage of Additional Device: 230 V
Control Voltage Type of Additional Device: AC
Protection Class (IP): IP20
Size (according to DIN 43880): 3

The remotely switchable circuit breaker Acti 9 Reflex iC60N has a breaking capacity of 20 kA at 220-240 V AC and 10 kA at 380-415 V AC. It is 4-pole, has a rated current of 40 A, a C characteristic, and a Ti24 interface. The insulation voltage (Ui) is 500 V. Remote switching is performed using pulse and/or continuous signal according to one of the three adjustable operating modes set by the user.

It protects circuits against short-circuit and overload currents and disconnects circuits. With the Ti24 connection option, direct connection to a PLC or decentralized I/O is possible. The bistable switching mechanism requires no holding power. A green indicator on the switch ensures that the contacts are open, guaranteeing safe operation on the outgoing side.

The jump switching ensures low-wear contact switching. An indicator light shows the operating status. Control is carried out through three adjustable operating modes using the push button on the front of the device. The protection class is IP20. To control the inputs Y1 and Y2 using 24/48 V AC/DC, the coupling relay iMDU can be used. Color shade RAL 9003. The remotely switchable circuit breaker Reflex iC60N meets the standards IEC/EN 60947-2.