Schneider Electric Circuit Breaker A9C62340

Manufacturer: Schneider Electric
Designation: Circuit Breaker 40A 3P C TI24
Type: A9C62340
Tripping Characteristic: C
Number of Poles: 3
Rated Current: 40 A
Rated Voltage: 415 V
Rated Short-Circuit Breaking Capacity according to IEC 60947-2: 10 kA
Voltage Type: AC
Frequency: 50-60 Hz
Switchable Neutral Conductor: no
Overvoltage Category: 4
Pollution Degree: 3
Width in Modular Units: 5.5
Installation Depth: 44.5 mm
Factory-Installed Additional Devices: Remote Drive
Rated Switching Current of Additional Device: 1 A
Rated Voltage of Additional Device: 230 V
Control Voltage Type of Additional Device: AC
Protection Class (IP): IP20
Size (according to DIN 43880): 3

The remotely switchable circuit breaker Acti 9 Reflex iC60N has a breaking capacity of 20 kA at 220-240 V AC and 10 kA at 380-415 V AC. It is 3-pole, has a rated current of 40 A, C-characteristic, and a Ti24 interface. The insulation voltage is 500 V. Remote switching is done via pulse and/or continuous signal according to one of the three adjustable operating modes set by the user.

It protects circuits against short-circuit and overload currents and disconnects circuits. With the Ti24 connection option, it can be directly connected to a PLC or decentralized I/O. The bistable switching mechanism does not require holding power. A green indicator on the switch guarantees that the contacts are open, ensuring safe operation on the outgoing side.

The jump switching mechanism allows for low-wear switching of the contacts. An indicator light informs about the operating status. Control is done through three adjustable operating modes via the push button on the front of the device.

Protection class IP20 is provided. To control the inputs Y1 and Y2 using 24/48 V AC/DC, the coupling relay iMDU can be used. Color shade RAL 9003. The remotely switchable circuit breaker Reflex iC60N complies with the standards IEC/EN 60947-2.