Schneider Electric LS Switch M9F21206

Manufacturer: Schneider Electric
Designation: LS Switch 2p 6A B 10kA
Type: M9F21206
Installation depth: 44 mm
Tripping characteristic: B
Total number of poles: 2
Number of protected poles: 2
Rated current: 6 A
Rated voltage: 277 V
Rated insulation voltage Ui: 500 V
Rated impulse voltage withstand Uimp: 6 kV
Voltage type: AC/DC
Rated breaking capacity Icu according to IEC 60947-2 at 230 V: 20 kA
Rated breaking capacity Icu according to IEC 60947-2 at 400 V: 10 kA
Frequency: 50..60 Hz
Power loss: 1.2 W
Flush-mounted: no
Switching neutral conductor: yes
Overvoltage category: 4
Degree of pollution: 3
Additional devices possible: yes
Width in division units: 4
Protection class (IP): IP20
Ambient temperature during operation: -30..70 °C
Connectable conductor cross-section multi-stranded: 1..16 mm²
Connectable conductor cross-section single-stranded: 1..25 mm²
Explosion-proof: no

Schneider Electric LS Switch M9F21206: additional details
Circuit breaker C60SP Multi 9 OEM, 5 kA. 2-pole, rated current 45A, D-characteristic, operating voltage (Ue) 415V AC IEC/EN 60947-2 / 277V AC UL 1077, insulation voltage (Ui) 500V AC. Simple connection terminal for cables and pin busbar on the top and bottom of the device. Mounting via standard clip closure on DIN rail. Jump switching for low-wear contact switching. Additional attachable auxiliary modules (optional) - indication of switching position (OFF), fault tripping (SD), working current tripping (MX, MX+OFF), undervoltage tripping (MN, MNs, MNx). Tool-free mounting on the left side of the device. The C60SP meets the following standards - IEC/EN 60947-2, UL 1077 / CSA C22.2 No. 235 / GB 14048-2. Circuit breakers C60SP are multi-standard circuit breakers that can be used worldwide, as they meet all international and also all major national standards.