Best selling Motion sensors from Peha
This page always stays fresh and updates automatically.
1. Peha Funkk
Easyclickpro Ceiling Motion Sensor
The wireless Easyclick ceiling motion sensor derives its energy from solar cells and detects movement using a 360-degree passive infrared sensor. The motion sensor is easy to install and saves energy. For example, the lighting automatically turns on when a person enters a room and automatically turns off with a delay after they leave. The motion sensor sends radio signals to the configurable Easyclick receivers or any EnOcean interfaces for building system technology.
When the brightness is below 50 Lux, battery operation (CR2032) is possible.
Technical specifications:
- Transmission frequency: EnOcean 868.3 MHz
- Detection range: approx. 12 m Ø
- Mounting height: 2-3 m
- Transmission range: approx. 25 m
- Minimum brightness: 50 Lux for automatic on/off
- Energy generator: solar cell, internal gold capacitor
- Learning start time: Learning = approx. 4 min. at 100 Lux, approx. 1.5 min. at 200 Lux
- Motion sending = approx. 6 min. at 100 Lux, approx. 3.5 min. at 200 Lux
- Test mode = approx. 5.5 hours at 200 Lux
- Full charging time: 9 hours at 200 Lux
- Charging times for operation: 3 hours per day at 200 Lux
- Operating time in the dark: approx. 48 hours
- Battery operation: approx. 1 year depending on usage frequency
- Transmission interval: immediate upon motion detection, variable every 60 seconds at 300 Lux to 300 seconds at 50 Lux, off every 10 and 30 minutes after the last motion
- EnOcean Equipment Profile: EEP A5-07-01
- Housing: PC, pearl white, similar to RAL 1013
- Protection class: IP 50
- Dimensions: 160 mm x 60 mm x 37 mm
- Weight: 125 g
- Environmental conditions: Installation only indoors, -10 ° to 40 °C, 20% to 95% relative humidity non-condensing
Suitable receivers: all Easyclickpro receivers. For daylight-dependent lighting control, a separate light sensor can be installed.
2. Peha Housing
The Peha Elektro housing is a functional surface-mounted frame model specifically designed to accommodate a keystone with dimensions of 19.6 x 15 mm. Equipped with a hinged cover, it offers easy handling and access to the installed components. The housing is made of high-quality plastic and is characterized by its robustness and durability. It is ideal for use in various electrical installations and ensures a clean and tidy assembly. The IP54 protection rating guarantees that the housing is dustproof, making it suitable for use in demanding environments. This product is manufactured in Germany and meets the high quality standards expected from Peha Elektro.
- Hinged cover for easy access
- Dustproof with IP54 protection rating
- Made from high-quality plastic
- Suitable for mounting keystones.
3. Peha D 451 FU-BM
The Peha D 451 FU-BM is an innovative wireless motion detector equipped with state-of-the-art EnOcean technology. This motion detector utilizes solar cells for energy generation and features a passive infrared sensor that accurately detects movements. Installation is straightforward, making it a practical solution for automating indoor lighting systems. When entering a room, the lighting automatically turns on, while it turns off again with an adjustable delay after leaving. The D 451 FU-BM communicates via radio signals with parameterizable Easyclick receivers, making it ideal for modern building system technologies. At a brightness level of less than 50 Lux, the motion detector can also operate on battery power (CR2032). The standard wide-angle lens can be replaced with a long-distance lens to extend the detection range.
- Energy generation through solar cells
- Easy installation and operation
- Automatic control of lighting systems
- Compatible with EnOcean interfaces for smart homes
- Replaceable lens for different detection areas.
4. Peha wall transmitter rws D 455.02 FU-BLS
The wall transmitter RWS D 455.02 FU-BLS from Peha Elektro is a versatile accessory for switch programs, distinguished by its easy integration into combination frames with an inner dimension of 55 x 55 mm. With its 4-channel functionality, this wall transmitter allows for flexible control of various electrical devices. The series rocker features a neutral center position and is clearly labeled for the functions I/0, making operation intuitive. The wall transmitter is designed for surface mounting and offers an appealing, minimalist look in the color group of white, which harmoniously fits into various living and working environments. Made in Germany, the wall transmitter guarantees high quality and durability.
- 4-channel functionality for flexible control
- Neutral center position of the series rocker with clear labeling
- Made in Germany for high quality and durability.
5. Peha D 450.02 FU-BLS N 2 channel white Wall transmitter
The D 450.02 FU-BLS N 2 Channel Wall Transmitter from Peha Elektro is a high-quality accessory for switch programs, distinguished by its functionality and appealing design. With a height of 15 millimeters and an elegant white finish, the device integrates harmoniously into various living and working environments. The transmitter is made of robust plastic, which ensures high durability. It features two inputs that allow for flexible use and are ideal for controlling electrical devices in a room. The installation is surface-mounted, ensuring easy setup. Made in Germany, the D 450.02 FU-BLS N stands for quality and reliability. This product is an excellent choice for anyone seeking a modern and efficient solution for controlling their electrical systems.
6. Peha Wall transmitter
The wall transmitter from Peha Elektro is an innovative accessory specifically designed for integration into switch programs with an internal dimension of 55 x 55 mm. With its 4-channel functionality, it allows for flexible control of various electrical devices, making it an ideal solution for individual control needs in residential and commercial spaces. The neutral central position of the series rocker ensures a simple and elegant appearance, while the high-quality plastic construction guarantees durability and reliability. The wall transmitter is suitable for surface mounting and meets high-quality standards, as it is manufactured in Germany. It is also smart home compatible and does not require an additional hub, further simplifying installation and use.
- 4-channel functionality for flexible control
- Neutral central position of the series rocker for elegant design
- Made in Germany with high-quality materials.
Product order
See all products