Best Bessey products in the Vices + Clamps category
On this page you'll find a ranking of the best Bessey products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Bessey St250
The support can also be used on sloping ceilings, because the large PVC support plates can be swiveled 45 ° to the right and left. The stable tubular steel construction is easy to use and quick to use. The fixation takes place in just two steps: the rough presetting with the help of the telescopic and lockable inner tube, and the subsequent tightening by turning the support on the foam handle. The ST250 ceiling and assembly support is resilient and non-slip, even on sensitive surfaces.
2. Bessey Variable high performance clamping
Clamping force up to 6,500 N. Centered positioning on the workpiece prevents tilting. Heat-resistant special pressure plate swivels up to 35°. The clamp can be pushed through an opening in the workpiece or component.
3. Bessey Decken- und Montagestütze STE150 mit Pumpgriff
The support – also known as a load-bearing pole – guarantees a reliably secure hold. It features an extremely stable construction with a load capacity of up to 350 kg, depending on the size of the support and the extension length. Rubberized PVC contact surfaces at the top and bottom, as well as an integrated slip protection in the handle, provide additional safety.
The support can be precisely adjusted to meet requirements and securely released. The fixation occurs in three steps: To pre-set the ceiling support, the release button is pressed, and the telescopic inner tube is extended to the desired length. Fine adjustment is made by operating the pump lever until the base plate of the support rests against the workpiece. Then, the handle is turned clockwise until the desired holding force is achieved (maximum load capacity must be observed).
Relaxation occurs in two steps: First, turn the ceiling support counterclockwise. Once there is no more holding force, press the release button to retract the inner tube.
4. Bessey One-handed clamp
The 360° swivel handle with a 12-step click mechanism allows the handle to be pivoted out of the working area after clamping. Improved application of clamping force is possible, as the position of the handle can be adjusted to achieve the most ergonomic position. It is possible to clamp multiple clamps side by side in tight spaces. The handle position can rotate up to 180°, providing access to each clamp. Clamping and releasing from various standing positions is easy. One-handed operation is effortless. The clamping force reaches up to 1,400 N.
5. Bessey Horizontal clamp
Clamping force of up to 750 N, suitable for use on multifunction tables such as Festool MFT and Sortimo WorkMo with a hole diameter of 20 mm and a minimum panel thickness of 19 mm. Quick fixation thanks to the laterally positioned clamping lever allows for full-surface processing of the workpiece, even with round and flat parts. The patented downward pressure mechanism prevents the workpiece from lifting off the table surface during clamping, even without a fastening screw. The MFT bench hook can also be used as a universal stop for workpieces. Delivery includes: 2 horizontal downward clamps, 2 bench hooks, 4 knurled nuts.
6. Bessey Replacement contact surface ST, STE
Accessories for ST and STE
Hazard warnings: Clamping tools are not suitable for lifting, pulling, or transporting. Clamping tools should only be tightened by hand without additional aids. Improper use can cause personal injury or property damage. Never modify or alter clamping tools; use them only in their original condition. Only use original spare parts if necessary.
7. Bessey One-handed table clamp
With a special guide at the top (snap-on adapter) for grooves measuring 12 x 6.5 mm to 12 x 8 mm. Use with the adapter on the lower part and the inverted upper part for securely fixing guide rails from brands such as Festool, Protool, Metabo, Makita, Hitachi/Hikoki, Dewalt, Bosch, and Mafell, as well as for clamping in profiles and on work tables. Can be used with the adapter on the upper or lower part for overlapping clamping. Can be used with or without the adapter - for clamping or spreading. Ergonomically shaped 2-component plastic handle with a pump lever behind the rail. Pack of 2 pieces.
8. Bessey Heavy duty U shape clamp
Double-sided clamping, specially designed for T and double-T profiles. Tightening torque of 80 Nm with a 19 mm hexagon at the spindle end.
9. Bessey Deep-clamping screw clamp TGNT-K
Design: High-quality, long ductile iron clamping arms for deep clamping depths; stable solid profile rail with ribbing. Smooth-running steel spindle with trapezoidal thread and movable pressure plate. Torque adjustment, securely clamped. Knob handle for high clamping force with minimal effort. Clamping force up to 7000 N.
10. Bessey Welding clamp set
Clamping aid for components of varying strength at any adjustable angle. Sturdy body and base plate made of high-quality cast iron. Copper-plated spindle prevents the adhesion of welding spatter. Angle range: 5°-180°.
The original BESSEY metal angle clamps were specifically developed for use in steel construction, welding, and locksmithing. Their versatile applications include holding, fixing, and aligning at a precise right angle. The open working area also allows for free access to the workpiece during welding and assembly tasks, as well as fixing T-joints. Therefore, the original BESSEY metal angle clamps should not be missing from any workshop!
Hazard warnings: Clamping tools are not suitable for lifting, pulling, or transporting. Clamping tools should only be tightened by hand without additional aids. Improper use can cause personal injury or property damage. Never modify or alter clamping tools; use them only in their original condition. Only use original spare parts if needed.
Care instructions: Generally remove dirt. Regularly clean and oil the spindle.
Application: Metal construction, locksmithing, for clamping angles and miters.
Material / Surface: Base body made of cast steel, galvanized. Spindle with trapezoidal thread rolled from steel, copper-plated. Knob made of galvanized steel.
