Top rated Ball bearings
This page always stays fresh and updates automatically.
1. SKF Deep groove ball bearings
SKF single-row deep groove ball bearings 2RS with contact seals on both sides, 6000-2RSH/C3 10x26x8. Bearing series 60, 62, 63, 618, 619.
Single-row deep groove ball bearings are particularly versatile. They have a simple design, are self-retaining, suitable for high to very high speeds, and are insensitive in operation and maintenance. The deep raceways and the close fit between the raceways and balls allow for the accommodation of radial loads as well as axial loads in both directions, even at high speeds.
Steel sheet cage, ball guided. Main dimensions DIN 625-1:1989 / DIN 616:2000 / ISO 15:1998. Supplementary designation: 2RS (2RS1/2RSH) steel sheet reinforced contact seals made of acrylonitrile-butadiene rubber (NBR) on both sides, C3 clearance greater than normal.
2. SKF Single action thrust ball bearings
SKF axial deep groove ball bearing, single acting, 51212, 60 x 95 x 26
Bearing series 511, 512. Single acting axial deep groove ball bearings are suitable for accommodating axial loads in one direction and can support the shaft on one side, but must not be subjected to radial loads. They consist of a shaft washer, a housing washer, and a ball set held by a cage. Due to their design, the bearings are not self-holding, allowing for separate installation of the bearing components, making the process straightforward. Cage made of steel sheet. Main dimensions according to DIN 616:2000 / ISO 104:2002.
3. DT Swiss 6902
The DT Swiss 6902 ball bearing has dimensions of 15 mm inner diameter, 28 mm outer diameter, and 7 mm width. It is designed for use with DT Swiss mosquito nets.
4. Enduro MR 18307
ABEC 3 ball bearings. The balls are grade 5 and the seals, one on each side, are double-lipped. These bearings are lubricated with the highly concentrated Teflon grease Rheolube 7703. Dimensions: 18 x 30 x 7.
5. SKF Y-bearings
SKF Y-bearing YAR with threaded stud fastening, for metric shafts, YAR 210-2F 50 x 90 x 51.6
Y-bearings, referred to as locating bearings in the standard, are based on sealed deep groove ball bearings of series 62 or 63 with a spherical outer ring raceway. The YAR bearings feature a widened inner ring on both sides. This design limits the possible tilting of the inner ring on the shaft, resulting in smoother operation of the bearings. The Y-bearings are sealed on both sides. DIN 626 1:1999 / ISO 9628:2006
Suffix:
2F Standard seals with a pre-mounted flinger on both sides
2R Multiple seals on both sides.
6. SKF Tapered roller bearings
SKF tapered roller bearing single row, 30212 J2/Q 60x110x23.75
Bearing series 302 tapered roller bearings feature conically shaped raceways in both the inner and outer rings, between which tapered rollers are arranged. The apexes of all conical surfaces converge at a common point on the bearing axis. Tapered roller bearings are therefore particularly suitable for accommodating combined (radial and simultaneously axial) loads. Due to their internal design, single row tapered roller bearings cannot be used alone but only in conjunction with a second bearing or as a bearing pair. Tapered roller bearings are generally not self-retaining. The inner ring with rollers and cage can be installed separately from the outer ring. Main dimensions DIN 616:2000 / DIN-ISO 335 / DIN 720:1979
Suffix: J2 window cage made of sheet steel Q optimized contact geometry and surface finish.
7. Enduro Bearings MR 18307 LLB ABEC 5
The Enduro Bearings MR 18307 LLU/LLB CN A5 bearing is designed for cycling enthusiasts seeking a product that combines performance and durability. Manufactured to high standards, this bearing is ideal for the demanding conditions found in the mountains or on varied trails.
Here are some features of this bearing:
- Dimensions: 18x30x7 mm, providing compatibility with many drive systems.
- High-quality materials: designed to resist wear while maintaining optimal performance on the road or off-road.
- LLU/LLB technology: equipped with seals that protect against dirt and moisture ingress, ensuring increased longevity.
- Professional use: ideal for professional cyclists and adrenaline junkies, this bearing allows you to push your limits.
This bearing embodies excellence in cycling technology and guarantees smooth and efficient performance. Thanks to its thoughtful design, it helps improve your bike's responsiveness, making for even more enjoyable and powerful rides.
Whether you are a mountain biker looking to optimize your bike for technical descents or a road cyclist aiming to enhance the efficiency of your efforts, the Enduro Bearings MR 18307 LLU/LLB CN A5 bearing is a smart investment for your cycling adventures. Maximize your riding experience and ensure you are always ready to face new challenges with this essential component.
8. Enduro Bearings 6903 LLB Abec 3
Experience has shown that Abec 3 bearings are the minimum quality level. Most bearings on the market are Abec 0 or Abec 1, i.e. one or two levels lower. The balls are grade 5 and the seals, one on each side, are double-lipped. These bearings are lubricated with the highly concentrated Teflon grease Rheolube 7703. Dimensions: 17 x 30 x 7 - SC: 477.
9. Enduro Bearings MR 18307 LLU/LLB CN ABEC 5, 18x30x7
10. FAG Deep groove ball bearing 6205 -C-2HRS-C3 (-2RSR-C3) Inner Ø 25 mm Outer Ø 52 mm Width15 mm
The FAG 6205 -C-2HRS-C3 (-2RSR-C3) deep groove ball bearing is a high-quality rolling bearing designed for a variety of applications in the machinery and automotive industries. With an inner diameter of 25 mm, an outer diameter of 52 mm, and a width of 15 mm, this ball bearing offers reliable performance and durability. It is made from standard bearing steel, ensuring high strength and resistance to mechanical stress. The tolerance class P0/PN or ABEC 1 provides precise fit and minimizes wear, extending the bearing's lifespan. This product is ideal for applications that require high speeds and low friction.
- Tolerance class P0/PN or ABEC 1 for precise fit
- Made from standard bearing steel for high strength
- Suitable for applications with high speeds and low friction.
Ball bearings
EUR14,86
FAG Deep groove ball bearing 6205 -C-2HRS-C3 (-2RSR-C3) Inner Ø 25 mm Outer Ø 52 mm Width15 mm
Product order
See all products