Top-rated products in the Multimeter category

Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.

1. Fluke VoltAlert voltage tester

The next generation of Fluke's VoltAlert™ AC non-contact voltage testers are easy to use - you simply touch a terminal block, power outlet or power cable with the test tip. When the measuring tip lights up red and the device beeps, voltage is present. Electricians, maintenance and security personnel, but also homeowners can quickly check at work or at home whether a circuit is live. 

Fluke VoltAlert voltage tester (CAT IV 1000V)
Multimeter
EUR43,76

Fluke VoltAlert voltage tester

CAT IV 1000V

2. Fluke Voltage tester

Voltage tester, non-contact, for AC voltage, plastic housing with clips, protective insulation, circuit and battery condition are permanently checked with push-button for battery test function, optical voltage display, operating temperature: -10°C to 50°C, ideal for finding conductor breaks on extension cables, cable reels, switches, fuses, fairy lights, etc., Complies with EN 61010 Cat.IV/1000V.

[ info ] Supplied with 2 batteries 1.5V (AAA).
 

Fluke Voltage tester (CAT IV 1000V)
Multimeter
EUR43,20

Fluke Voltage tester

CAT IV 1000V

3. Voltcraft AC/DC TrueRMS current clamp

The ultra-compact entry-level clamp meter combines ergonomic technology and very good value for money. The current clamp enables non-contact current measurement and the usual multimeter functions. Thanks to the clamp sensor, it is no longer necessary to disconnect the circuit for the measurement. The VC-330 is also ideal for measurements in the automotive or solar sector, as it has a function for direct current measurement. Robust and easy to handle Thanks to the 2-component housing with integrated soft-rubber protection, the meter can also withstand tough applications. The rubberised housing shell also makes the meter very easy to grip. Current clamp for uninterrupted current measurement The current clamp enables non-contact DC and AC current measurement. The advantage of this measuring method is the clamp function, with which current measurements can be carried out without the usual switching off and disconnection of the circuit. System downtimes are thus effectively avoided. Exact measured values through True RMS true rms value measurement True RMS true rms value measurement enables the exact measurement of unbalanced voltages and currents that deviate from the basic shape of the sine wave. Unbalanced voltages are mostly found in power controllers such as dimmers, speed controllers, clocked switching controllers, pulsed chargers or electronic speed controllers in model making, etc. Conventional mean value measuring instruments sometimes show very large measuring deviations for such special measuring tasks. Reliable measurement results with factory calibration As part of quality assurance, a calibration according to factory standard is carried out for all Voltcraft meters in the production of the meter. This ensures high quality and compliance with the tolerance limits as specified in the technical data of the operating instructions. A certificate is not issued for this. 

Voltcraft AC/DC TrueRMS current clamp (CAT II 600V, CAT III 300V)
Multimeter
EUR84,27

Voltcraft AC/DC TrueRMS current clamp

CAT II 600V, CAT III 300V

4. Fluke 115 digital multimeter

Designed for daily use, the Fluke 115 multimeter is optimized for electrical and electronic testing in the field, in industry, and in applications where additional functions make work easier, such as the measurement of direct and alternating current. 

Fluke 115 digital multimeter (CAT III)
Multimeter
EUR249,74

Fluke 115 digital multimeter

CAT III

5. InLine Multimeter

The meter is a digital handheld multimeter with 3.5 digit display for measuring DC and AC voltages, DC current, resistance, diodes, temperature and continuity test. 9V battery not included. 

6. Fluke LVD2 Multi-Tester 600 V CAT IV

Contactless AC voltage tester and LED torch in a handy pen-shaped device. LVD2 is a non-contact tester with safety specification CAT IV 600 V and is suitable for commercial and industrial applications. LVD2 has two sensitivity levels. The unit glows blue when it is 1 to 5 inches (2.54 cm to 12.7 cm) from the source and red when it is directly at the source. 

Fluke LVD2 Multi-Tester 600 V CAT IV (CAT IV 600V)
Multimeter
EUR53,71

Fluke LVD2 Multi-Tester 600 V CAT IV

CAT IV 600V

7. Joy-it USB Volt-/Ampermeter

The TC66C is a small but multifunctional USB-C multimeter. Supporting current Quick Charge standards, it can also be easily used in conjunction with current handheld hardware. 

8. Fluke T150 Vde

Consideration of customer requirements
The new Fluke voltage and continuity testers are now more rugged and easier to use than ever before.
Fast test results that
you need in your daily work with large, easy-to-use buttons, backlighting, and easy-to-understand audible and physical indicators for every work situation.
Sturdy, high-quality construction for long service life. This includes a hard-wearing, injection-moulded plastic housing, a thicker measuring cable with wear indicator, a sturdy battery housing and a precisely fitting protective device for the measuring tips.
The improved ergonomic design facilitates handling and operation (even with gloves) and enables fast, safe contact with the measuring tips.
 

9. Joy-it LCR T7

The device can distinguish between different types of transistors, such as NPN or PNP transistors. It is particularly easy to use, as all measurements can be started with just the push of a button. Thanks to the integrated 350 mAh battery, measurements can also be taken on the go. The battery is charged using a 5V power supply (available separately) and the included microUSB cable. Additionally, this measuring device can decode infrared signals and display them in waveform on the screen. 

10. Voltcraft VC151 Digital Multimeter

The VOLTCRAFT® handheld multimeter VC151 is your robust entry-level instrument for many measuring tasks. The manual measuring range selection enables measurement and measured value display with a specified resolution. With the voltage measuring range up to 600 V, you also perform professional tasks reliably and safely. Other performance features such as resistance measurement, diode and continuity test and the hold function testify to the high level of technology of your measuring device. And all this at the usual low Conrad price. Reliable measurement results with factory calibration As part of quality assurance, a factory standard calibration is carried out for all VOLTCRAFT® measuring instruments in the production of the measuring instrument. This ensures high quality and compliance with the tolerance limits as specified in the technical data of the operating instructions. A certificate is not issued in this process. 

Voltcraft VC151 Digital Multimeter (CAT III 600V)
Multimeter
EUR98,45

Voltcraft VC151 Digital Multimeter

CAT III 600V