Top rated Welding machines
Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.
1. Güde SG 131 A-SYN
Compact inverter welding machine with innovative filler wire technology. IGBT-supported inverter technology for extremely fast switching processes and precise welding current regulation, simplifying the welding of thinner sheets and significantly reducing weld bead formation. Easy and effective welding with special wire, where the shielding gas is encapsulated in powdered form. With the new, innovative synergic-controlled wire feeder, the wire feed speed automatically adjusts to the optimal value. Ideal for occasional, smaller use in the workshop and on-site, as no gas cylinder is required. Suitable for medium material thicknesses of 1.5 to 8 mm. Continuously adjustable from 20 to 120 Amperes. Also suitable for outdoor welding in windy conditions, as the shielding gas cannot be blown away. Ready to use immediately with connected hose package, ground clamp, including brush hammer, welding shield, 0.45 kg of 0.9 mm welding wire, 3 replacement nozzles of 0.9 mm, and a replacement feed roller of 0.9 mm.
2. Stahlwerk Welding machine ARC 200 MD Digital - DC MMA Lift-TIG Inverter 200 Ampere
Properties
MMA electrode welding / ARC welding - a universal welding process. An electric arc melts the electrode to form the weld seam. No shielding gas is required and can therefore be used flexibly at any location.
With our optionally available WP-17V Universal Lift TIG torch, it can be expanded into a DC TIG welding unit.
The set welding parameters can be easily read on a clear digital display. The various modes can be set quickly using the intuitive menu.
Note: The device is not intended for use in residential areas where power is supplied via a public low-voltage supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.
Technical data
Output current MMA: 30-200 A
Protection class: IP21S
Mains voltage: 230 V AC (+-15%) / 1 ~ (single-phase)
Mains frequency: 50/60 Hz
Maximum mains current (I1max): 40.3A
Maximum effective mains current (I1eff): 13,3A
Weight: 3.2 kg
Dimensions L x W x H (mm): 245 x 100 x 160
Mains connection: CEE 7/7 Schuko plug
Standards: IEC 60974-1; EN 60974-10 (Class A)
IGBT board type: Single board
Scope of delivery
1 x The ARC 200 MD IGBT steelwork welding machine
1 x earth cable 3 metres
1 x electrode holder 3 metres
1 x protective cover
1 x slag hammer
1 x wooden wire brush
Welding machines
EUR132,60
Stahlwerk Welding machine ARC 200 MD Digital - DC MMA Lift-TIG Inverter 200 Ampere
3. Stahlwerk Welding machine ARC 200 MD Digital fully equipped - Inverter 200 Ampere
Properties
MMA electrode welding / ARC welding - a universal welding process. An electric arc melts the electrode to form the weld seam. No shielding gas is required and can therefore be used flexibly at any location.
Can be expanded to a DC TIG welding unit with our optionally available WP-17V universal lift TIG torch.
Note: The device is not intended for use in residential areas where power is supplied via a public low-voltage supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.
Technical data
Output current MMA: 30-200 A
Protection class: IP21S
Mains voltage: 230 V AC (+-15%) / 1 ~ (single-phase)
Mains frequency: 50/60 Hz
Maximum mains current (I1max): 40.3A
Maximum effective mains current (I1eff): 13,3A
Weight: 3.2 kg
Dimensions L x W x H (mm): 245 x 100 x 160
Mains connection: CEE 7/7 Schuko plug
Standards: IEC 60974-1; EN 60974-10 (Class A)
IGBT board type: Single board
Scope of delivery
1 x The ARC 200 MD IGBT steelwork welding machine
1 x earth cable 3 metres
1 x electrode holder 3 metres
1 x protective cover
1 x slag hammer
1 x Wooden wire brush
1 x Welding helmet WORKER 3-in-1 automatic welding helmet Welding shield
1 x rod electrodes AWS E6013RR thick rutile coated 2mm x 300mm
Welding machines
EUR178,99
Stahlwerk Welding machine ARC 200 MD Digital fully equipped - Inverter 200 Ampere
4. MAR Pvc Pipe Welding Machine Mar-Pol Large
The Mar-Pol Large PVC pipe welding machine is a powerful and professional tool designed for welding various types of fittings and hydraulic pipes. With a robust construction and high efficiency, this device is ideal for demanding applications in the field of pipe processing. The machine offers precise temperature control ranging from 100 to 300 degrees Celsius, allowing for optimal adjustment to different materials and requirements. It can weld pipes with a diameter of 16 to 63 mm and has a power output of 2660 W, ensuring fast and reliable processing. The standard equipment includes various attachments, a sturdy metal case, and useful accessories such as gloves and a pipe cutter, making the use of the machine even more convenient.
- Powerful welding machine for PVC pipes
- Temperature control from 100 to 300 degrees Celsius
- Suitable for pipe diameters of 16 to 63 mm
- Includes extensive accessories and attachments
- Robust and durable construction.
5. Telwin Maxima 200 Synergic
The very flexible application possibilities and the various weldable materials (steel, stainless steel, aluminum) allow for a wide range of applications, from maintenance to installation. The quick adjustment of the synergistic welding parameters makes the product extremely user-friendly, even for less experienced operators. Its lightweight and compact dimensions also ensure that the device can be easily transported to all work locations, both indoors and outdoors.
Features: Polarity switching for gas MIG-MAG/BRAZING welding, protective devices including thermostat, overvoltage, undervoltage, overload, power generator (+/- 15%). Arc-Force adjustment for MMA, Euro connector for the torch. Ready for No Gas/Flux welding, convertible to MIG-MAG with the extra conversion kit. Complete with MIG-MAG torch, ground cable, and ground clamp. Note: A gas hose of 6.3 mm for welding machines is additionally required for connecting a pressure reducing valve. The pressure reducing valve is not included in the delivery.
6. Güde Electrode welder GE 145 W
Electrode welder GE 145 W
- Housing made of powder-coated sheet steel
- Thermal overload protection
- 100 A max. welding current
Technical data
230 V~50 Hz
Max. mains power 5 kVA
Fuse protection, slow 16 A
Open circuit voltage 48 V
Recommended material thickness 1.5-4 mm
Max. welding current 100 A
Control range (for electrical 2-3 mm) 40-100 A
ED at max. current 230 V~20%
Insulation class H
Protection class IP 21 S
Dimensions L x W x H 330 x 180 x 250 mm
Weight 13 kg
Packing size L 410 x W 225 x H 290 mm
Scope of delivery
Güde electrode welder GE 145 W
Ground cable with ground clamp
Welding cable with electrode holder
Slag hammer
Wire brush.
7. Stahlwerk Plasma cutter CUT 50 ST IGBT fully equipped with 50 amps
Properties
Plasma: conductive metals e.g. standard steel, copper, stainless steel, brass, aluminium, titanium can be cut without problems.
Cutting capacity up to 14 mm (depending on material): mild steel ST37 up to 14 mm / V2A or V4A up to 8 mm, - aluminium up to 5 mm
CUT contact: smooth-running HF ignition, one stroke is enough.
Technical data
Output current: 15-50 A
Protection class: IP21S
Mains voltage: 1 x 230 V AC (+- 15%)
Mains frequency: 50/60 Hz
Maximum mains current (I1max): 33 A
Maximum effective mains current (I1eff): 13,1 A
Weight: 7.2 kg
Dimensions L x W x H (mm): 390 x 170 x 275
Mains connection: CEE 7/7 Schuko plug
Air pressure: 3.5 - 4 bar
Air flow: min. 100 L / min
Standards: IEC 60974-1; EN 60974-10 (Class A)
Scope of delivery
1 x Stahlwerk plasma cutter CUT 50 ST
1 x professional plasma hose package AG-60/SG-55, 3 metres
1 x 3-piece plasma accessory set (this is already pre-assembled on the plasma torch):
1 x plasma nozzle
1 x plasma electrode
1 x ceramic cap
1 x earth cable 3 metres
1 x water separator with pressure gauge and snap-on quick-release couplings
1 x Connecting hose with snap-on quick-release couplings from the appliance to the water separator, incl. 6-piece connection set
1 x Air connection hose with Snap-on quick-release coupling 5m
1 x protective cover
1 x Teflon tape
1 x Original wear parts set 25 pieces for plasma cutting torch AG-60 / SG-55
1 x WORKER 3-in-1 automatic welding helmet Welding shield
Welding machines
−17%
EUR250,99 was EUR303,99
Stahlwerk Plasma cutter CUT 50 ST IGBT fully equipped with 50 amps
8. Stahlwerk Plasma cutter CUT 50 ST IGBT with 50 amps, up to 14mm cutting capacity
Properties
Plasma: conductive metals e.g. standard steel, copper, stainless steel, brass, aluminium, titanium can be cut without problems
Cutting capacity up to 14 mm (depending on material): mild steel ST37 up to 14mm / V2A or V4A up to 8 mm, - aluminium up to 5 mm
CUT contact: smooth-running HF ignition, one stroke is enough.
IGBT technology Advantages: powerful, good forward behaviour, high reverse voltage and robustness.
Technical Data
Output current: 15-50 A
Protection class: IP21S
Mains voltage: 1 x 230 V AC (+-15%)
Mains frequency: 50/60 Hz
Maximum mains current (I1max): 33 A
Maximum effective mains current (I1eff): 13,1 A
Weight: 7.2 kg
Dimensions L x W x H (mm): 390 x 170 x 275
Mains connection: CEE 7/7 Schuko plug
Air pressure: 3.5 - 4 bar
Air flow: min. 100 L / min
Standards: IEC 60974-1; EN 60974-10 (Class A)
Scope of delivery
1 x The CUT 50 ST steelwork plasma cutter
1 x professional plasma hose package AG-60/SG-55, 3 metres
1 x 3-piece plasma accessory set (this is already pre-assembled on the plasma torch):
1 x plasma nozzle
1 x plasma electrode
1 x ceramic cap
1 x earth cable 3 metres
1 x water separator with pressure gauge and snap-on quick-release couplings
1 x Connecting hose with snap-on quick-release couplings from the appliance to the water separator, incl. 6-piece connection set
1 x Air connection hose with Snap-on quick-release coupling 5m
1 x protective cover
1 x Teflon tape
Welding machines
EUR199,99
Stahlwerk Plasma cutter CUT 50 ST IGBT with 50 amps, up to 14mm cutting capacity
9. Wiltec PE-Rohr Schweissgerät
With this welding machine, you can easily weld thermoplastic pipe elements, sockets and fittings. With an output of up to 2000 watts and a maximum temperature of up to 300 °C, the mandrel heaters in various sizes offer optimum welding as required. The supplied mandrel heaters are available in sizes of 16, 20, 25, 32, 40, 50 and 63 mm. You also receive a hexagon spanner, a screwdriver, pipe shears and a tape measure - all packed in a robust metal case. The ergonomic handle and adjustable temperature make it easy and comfortable to use. The high-quality aluminium coating also offers stability and durability.
10. Güde GIS 162
Anti-stick prevents sticking The GIS 162 inverter welder from Güde is designed for occasional, short and simple welding work in the DIY and hobby sector. It is also ideally suited for light welding work on assembly sites and for stationary use. The compact design and low weight as well as a practical carrying strap offer maximum flexibility and mobility. With the GIS 162, all common electrodes up to a diameter of 3.2 mm can be welded at a power of up to 120 A. Top features such as ARC FORCE for stabilising the arc, HOT START for easy ignition of the electrodes through voltage increase and high frequency and last but not least ANTI STICK, which prevents annoying sticking and annealing of the electrode, ensure top results even for inexperienced welders.
