Best selling Multimeter

Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.

1. Benning 044104

The Benning IT 115 is a state-of-the-art handheld multimeter specifically designed for testing electrical systems. It meets the requirements of DIN VDE 0100-600, IEC 60364-6, DIN VDE 0105-100, and EN 50110. With its graphical display and backlighting, it offers a user-friendly interface that is easily readable even in low light conditions. The device supports a wide range of measurements, including insulation resistance, low resistance measurement, and earth measurement, and is capable of delivering precise results across a broad voltage range. The integrated help function with connection diagram simplifies usage and ensures efficient operation. The IT 115 is an indispensable tool for professionals working in electrical installation who demand the highest standards of measurement accuracy.

- True RMS measurement for precise results
- Graphical display with backlighting and help function
- Extensive testing options for RCD/ELCB protection switches
- Earth measurement using the 3-wire method
- Calibration to factory standards with certificate.
 

2. Bosch Professional GVD 1000-17

The GVD 1000-17 voltage tester is a high-performance tool designed to increase the safety and efficiency of professionals working with electricity. Thanks to its IP67 protection rating, the tool guarantees protection against dust and immersion in water, while the robust rubberised housing can withstand drops from a height of up to 2 m. With two voltage detection ranges from 24 V to 1,000 V AC and high sensitivity for the 24 V range, the voltage tester offers high versatility for numerous applications. The GVD 1000-17 also offers an automatic self-test that is performed every 5 seconds to confirm correct function during use, providing reliability and safety that inspires confidence.

This voltage detector is essential for electricians who need to perform quick voltage tests in a variety of environments - from harsh construction site environments to clean indoor spaces. Whether troubleshooting electrical installations, testing sockets or ensuring circuit earthing: The GVD 1000-17 is the ideal tool. Its integrated torch helps in poor lighting conditions, and the practical belt clip means the device is always ready to hand. The GVD 1000-17 is CAT IV 1000 V tested to provide a further level of safety for employees working with high-voltage systems.

The tool includes a red, orange or green illuminated tip as well as a buzzer and vibrating alarm for clear voltage indication. Designed to make the most difficult tasks easier and safer, the GVD 1000-17 is an essential tool in the toolbox of any professional working with electricity.
 

Bosch Professional GVD 1000-17 (CAT IV 1000V)
Multimeter
EUR65,49

Bosch Professional GVD 1000-17

CAT IV 1000V

3. Klein Tools Network Tester Scout Pro 3 Cable Tester with PoE Test Function and Remote ID Kit

Use the 18 included remote units to identify multiple cable runs simultaneously. Check for Power over Ethernet (PoE) and measure cable length. This kit guarantees correct cable installations every time. Backlit display aids reading in low light.roduct featuresCable tester for voice (RJ11/12), data (RJ45) and video coaxial (F-connector)Track cables, wires, paired and individual line cables with a tone generatorSelf-storing Test + Map™ remote unit (no. 1) handles testing, mapping and identifying cable runs in one stepMeasures cable lengths up to 2000 feet (610 m)Identifies multiple cable runs simultaneously with included remote unitsIdentifies 18 RJ45 and 18 F-connector drop locations with large, easy-to-read numbersDetects and tests Power-over-Ethernet (PoE)Backlit LCD display shows cable length, conductor mapping, Cable ID and test resultsHub blink mode to identify jack location on a hub or switchIncludes 1 self-stowing Test + Map Remote unit (31), 18 RJ45 LAN remote locators, 18 F-coax remote locators, 2 jack-to jack coax adapters and a 9 V batteryThe convenient padded carrying case keeps everything together and within easy reach. 

Klein Tools Network Tester Scout Pro 3 Cable Tester with PoE Test Function and Remote ID Kit
Multimeter
EUR312,65

Klein Tools Network Tester Scout Pro 3 Cable Tester with PoE Test Function and Remote ID Kit

4. Peaktech P 2715 Digital LOOP/PSC loop current meter

The PeakTech 2715 is a loop tester and circuit tester designed for checking the safety of electrical installations. This device measures the impedance of the short-circuit loop between the live conductors of a circuit, calculating the expected short-circuit current. Therefore, the circuit protection (circuit breaker) must trip at a lower current than the expected short-circuit current to prevent excessive heating of the wires and thus avoid fire hazards. The PeakTech 2715 is nearly indispensable for carrying out new installations due to its functionality and robust design. It is also the ideal companion for general inspections of electrical systems. 

Peaktech P 2715 Digital LOOP/PSC loop current meter (CAT III 600V)
Multimeter
−10%
EUR143,03 was EUR158,16

Peaktech P 2715 Digital LOOP/PSC loop current meter

CAT III 600V

5. Uni-T Current clamp PRO UT281C

The Uni-T PRO UT281C clamp meter is not only useful for electricians but also for electrical installers who frequently and quickly perform electrical tests on a daily basis. The device allows for AC and DC voltage measurements as well as resistance measurements, and it assists in checking circuit or diode continuity. Using the PRO UT281C ensures users a safe and stable operation along with reliability.

Technical specifications:
- AC current: 30 A / 300 A / 3000 A ± (3 % + 5); (Measured current frequency range: 40 ~ 500 Hz)
- Inrush current: 0.5 A ~ 3000 A
- Manual range selection
- True RMS measurement
- Last measurement recorded
- Buzzer
- Backlit LCD display
- Automatic shutdown
- Low battery indicator
- Maximum measurement value: 3000
- Protection class: IP54
- Measurement rate: 3 / s
- Power supply: 3x 1.5 V (R03)
- Clamp diameter: 18" (45.7 cm)
- Display size: 32 x 34 mm
- Dimensions: 350 x 190 x 55 mm
- Weight: 220 g

Included in the package: Batteries, CD.
 

Uni-T Current clamp PRO UT281C
Multimeter
EUR119,–

Uni-T Current clamp PRO UT281C

6. Siemens DIN-rail power supply unit (DIN-rail

The LOGO!Power mini power supplies in the design of the LOGO!8 modules offer a lot of power in the smallest space. The good efficiency over the entire load range and the low power loss in no-load operation guarantee efficient operation. The wide-range input for single-phase networks and for DC networks, as well as the power reserve when switching on capacitive loads, meet the requirements of numerous applications. The wide temperature range and extensive certifications also enable universal use. The reliable power supplies with their flat stepped housing can be integrated in a highly flexible manner - for example in installation distributors. Regardless of the industry, regardless of the requirement - Siemens offers reliable and efficient power supplies for every system. 

Siemens DIN-rail power supply unit (DIN-rail
Multimeter
only 1 piece 
EUR90,36

Siemens DIN-rail power supply unit (DIN-rail

7. Klein Tools KLT VDV226-107

Klein Tools VDV226-107 Crimping Tool.

Klein Tools KLT VDV226-107
Multimeter
−10%
only 3 of 3 remaining on sale
EUR45,78 was EUR50,98

Klein Tools KLT VDV226-107

8. Beha Amprobe Two-pole voltage tester 21

The Beha-Amprobe voltage tester 2100-Alpha is a robust and easy-to-use two-pole voltage tester designed for voltage and continuity testing. The 2100-Alpha has been developed for industrial and commercial applications in the range of 12 to 690 V AC and DC with safety ratings of CAT IV 600 V and CAT III 690 V, in accordance with the standards for voltage testers and GS certified. 

Beha Amprobe Two-pole voltage tester 21 (CAT IV 600V, CAT III 1000V)
Multimeter
EUR77,49

Beha Amprobe Two-pole voltage tester 21

CAT IV 600V, CAT III 1000V

9. Benning Double pole voltage tester DU

The DUSPOL digital is a digital true RMS voltage and continuity tester with resistance and frequency range. The voltage tester is suitable for electrical engineering, industry, maintenance, service (troubleshooting), as well as photovoltaic and wind power systems. 

Benning Double pole voltage tester DU (CAT IV 600V, CAT III 1000V)
Multimeter
EUR90,77

Benning Double pole voltage tester DU

CAT IV 600V, CAT III 1000V

10. Uni-T Cable tester UT681HDMI

The UT681 series of portable cable testers can quickly test Ethernet/telephone/BNC/HDMI cables for conductivity, shorts, crossovers or open circuits. These are ideal tools for technicians to install, maintain and test the current system circuit. Specification: Purpose: HDMI, mini HDMI cable Number of lines read: LED1 ~ LED19, LED_S Quick scan test / Full scan test: LED1 ~ LED19, LED_S Check for short circuit, open circuit, cable crossing, etc. Manual/automatic shutdown. Power supply: 9 V. Low battery indicator: Less than 7.2 V. Dimensions: Transmitter 102 x 62 x 28 mm; Receiver 102 x 37 x 28 mm Weight: Transmitter 87 g; Receiver 51 g Operating temperature and humidity: 0 ~ 40 °C; 20 ~ 80 % relative humidity. Storage temperature and humidity: -10 ~ 50 °C; 10 ~ 90 % RH Operating altitude: Max. 2000 m above sea level. Certificates: CE EN61326-1: 2013; EN61326-2-2: 2013 Accessories: 9 V battery. 

Product order
See all products