don't know what's going wrong at digitec🤷♂️ either.

I have the monitor in use with a 27". In my opinion, side by side is not possible because the AOC is too wide. That's why I got the following mount: NewStar FPMA-D550DVBLACK. My 27" is above my AOC and that works well, but of course it's a matter of taste.

Then take the 100Hz model:-)

I have been waiting for this monitor since 19 March and the delivery date has been extended several times. I.e. it is not even in stock at the supplier.

No, but it can output the audio signal from the HDMI to a jack plug on the monitor, so you can plug LS's or HP's directly into it.

Oops... I put the answer in the wrong place sry.

I'm not sure but on the picture you can see the section

The height of the screen is approximately 33.4 cm (333.72 mm) without the stand. The screen diagonal measures 86.36 cm (34 inches). Height adjustment of up to 13 cm (130 mm) is also possible.

Yes, the monitor is also a USB hub and devices such as speakers can be connected.

The monitor is 367.5 mm high, measured from the base to the top edge of the screen. The exact height may vary depending on the setting of the height adjustment mechanism, which offers an adjustability of 130 mm.

Yes, you can connect a graphics card with DisplayPort 2.1 to this monitor, which uses DisplayPort 1.4. However, the image quality will not be improved by a DP 2.1 cable compared with a 1.4 cable, because the limitation comes from the monitor port itself, which only supports DisplayPort 1.4. The DP 2.1 cable will be compatible, but it will not be able to exploit the advanced features of DisplayPort 2.1 with this display.

I was in the PlayStation settings under sound and screen then on display area settings and adjusted it but it was on PS4 hope could help anyway

I think you'll find an answer in Google. I honestly have no idea myself :D

To achieve the full 180Hz refresh rate with a laptop, you need to ensure that your laptop's graphics card supports this high refresh rate and that you are using a compatible connection method. The AOC CU34G2XP monitor supports 180Hz via DisplayPort, so using a DisplayPort connection is recommended. If your laptop only has HDMI ports, it may not reach the full 180Hz, as HDMI typically supports up to 100Hz or 144Hz for this monitor, depending on the specific HDMI version and laptop capabilities. If your laptop supports DisplayPort output via USB-C with DisplayPort Alternate Mode, you might need an adapter to connect to the monitor's DisplayPort. However, not all USB-C ports support this feature, so check your laptop's specifications first.

The description is not correct, I had the same problem. I contacted Digitec support and we found a solution.

Absolutely. I use my PS5 with it all the time

There are no major problems or specific incompatibilities between the AOC CU34G2XP/BK display and NVIDIA graphics cards, including the RTX 4070 Super. Here are some key points to consider: - The display supports DisplayPort 1.4 and HDMI 2.0 connections, which are compatible with most modern graphics cards, including the NVIDIA GeForce RTX series. - The display uses Adaptive-Sync technology, which is compatible with AMD FreeSync, but does not specifically support NVIDIA G-Sync. However, as of 2019, NVIDIA has opened up G-Sync compatibility with some FreeSync monitors, so it could work with some setups, but this is not guaranteed. - For optimal use, make sure your graphics card is powerful enough to handle the display's UWQHD (3440x1440) resolution and 180Hz refresh rate. To sum up, your RTX 4070 Super should work without any major problems with this display, but you may need to adjust some settings to optimise performance.

Nein. HDMI 1.4

Speakers seem to be in there, but they won't be good ones, or will never be satisfactory given the size. Sorry.

For the AOC CU34G2XP/BK monitor, here are the details you requested: - Height adjustment range: The screen can be adjusted in height over a range of 130 mm (bottom to top). - Lowest position: In the lowest position, the bottom of the screen is at a minimum height from a support, but the exact height from the work surface is not specified. However, you can deduce that the minimum height of the bottom of the screen is 0 mm plus the height of the base, which is not precisely specified. You will need to add the height of the stand to the minimum adjustable height. - Screen tilt: The screen can be tilted from -3.5° forwards to +21.5° backwards on a horizontal axis.

Not 100% sure but this is my opinion. This monitor can display 1920x1080, but it won't fill the screen (i think you will have black bars or stretched image). Reason is the Aspect ratio here is 21:9 (ultrawide) and on 1080p: the aspect ratio is 16:9. It has a HDMI slot. If the black bars are problematic then try an AOC monitor with resolution 1920 x 1080 pixels, 27", it is cheaper too :)