EUR119,–
Arctic Liquid Freezer III - 240 (Black)
Questions about Arctic Liquid Freezer III - 240 (Black)
What would you like to know?
0 questions and answers
Galaxus
1 year ago
Helpful answer
The Arctic Liquid Freezer III 360 A-RGB can be installed in the Thermaltake View 270 TG ARGB Mid Tower Chassis. Here are the key points to consider:
- The View 270 TG ARGB case supports up to 360mm radiators on the top, which is compatible with the Liquid Freezer III 360 A-RGB.
- The case has sufficient space to accommodate the radiator and the other components of the liquid cooler.
- However, you should ensure that the case's mounting points and the cooler's dimensions align properly for a smooth installation.
In general, the compatibility is there, but it's always a good idea to double-check the specific mounting points and clearance within the case before proceeding with the installation.
Automatically generated from the .
Helpful answer
yes the cooling paste is included
Helpful answer
800—2800 rpm
Helpful answer
It is possible, but it depends very much on the case and motherboard whether it hits the RAM bar directly or not.
There was probably a pricing error here, which has since been corrected.
The normal 4 pin, but only 2 occupied
Helpful answer
In my case, the fans were pre-assembled.
Galaxus
7 months ago
Helpful answer
The maximum TDP that the AiO water cooling system can dissipate is around 205 watts, as demonstrated in a test with an Intel i9-12900K, where the cooling system was able to handle this power. In addition, the cooling was tested and confirmed by Intel on powerful processors such as the i9-13900K/KF, i9-14900K/KF and i9-13900KS, which indicates a high cooling performance even with demanding CPUs.
Automatically generated from the .
can this Aio also be used for the lga1851 socket like the white Arctic liquid Freezer III 360 A-RGB?
Helpful answer
Unless I'm mistaken, I think it's compatible, but to be really sure, go to the manufacturer's website or contact them to ask.
Galaxus
8 months ago
Replacing the water in an All-in-One (AiO) water cooler such as Arctic's is not usually necessary as these systems are designed as closed circuits. As long as there are no leaks or other damage, the coolant should remain in the system for its lifetime. However, it is important to follow the manufacturer's instructions if specific maintenance recommendations are given.
Automatically generated from the .
Helpful answer
Unfortunately not, unless you "edit" the inside clearance of the case, so I'm now building my own Custome case 😅😂
But it could also be that you can order the template for 420mm mounting from nzxt.
Galaxus
8 months ago
Yes, the cooling can be installed at the top of the Corsair 4000D. The Corsair 4000D supports radiators up to 240 mm both at the top and front of the case.
Automatically generated from the .
Helpful answer
was?!
You can easily mount the 360 on top with connection to the front
even a 420 is possible when mounting in the front
Helpful answer
the best place to look for the dimensions is on the homepage: https://www.arctic.de/Liquid-Fre... .
Since I don't want to open up my pc again and measure it, with the attachment - 68.5mm specified at arctic and base plate I would say around 80mm.
Greetings
Galaxus
10 months ago
Helpful answer
Yes, the thermal paste is included in the scope of delivery. ARCTIC supplies the product with MX-6 thermal paste for quick and easy installation.
Automatically generated from the .
Galaxus
10 months ago
Yes, you can use different fans for the AIO cooler. Any standard 120mm PC fan will work as a replacement, allowing you to choose fans that suit your specific needs or preferences.
Automatically generated from the .Galaxus
10 months ago
The airflow of the Liquid Freezer III 360 A-RGB is provided by three 120 mm fans, each capable of delivering a maximum airflow of 48.82 cfm (82.91 m³/h) and a maximum air pressure of 1.85 mmH2O. Additionally, the system includes a 60 mm PWM-controlled VRM fan for enhanced cooling of the socket area.
Automatically generated from the . Helpful answer
Reddit sagt ja.
https://www.reddit.com/r...
Helpful answer
Yes, that's normal with Artic, you have a QR code to scan and there's cardboard and foil inside but not on the outside. But it's the same with Asrock and Gigabyte.
Galaxus
11 months ago
Helpful answer
The water cooling in question is designed to be compatible with several platforms, including Intel LGA 1700, which is the socket used for processors such as the i7 14700KF. However, to ensure effective heat dissipation, it is important to ensure that the cooling system is correctly installed and configured. Some users have reported overheating problems with 13th and 14th generation Intel processors, even with high-quality coolers such as the Liquid Freezer III, due to the high thermal demands of these processors.
For optimal performance, it is advisable to check that the cooling system is well configured and that there are no installation or compatibility problems with the motherboard. In addition, adding additional fans or optimising airflow in the case can help improve heat dissipation.
Automatically generated from the .Galaxus
1 year ago
Helpful answer
Arctic's Liquid Freezer III - 360 A-RGB liquid CPU cooler may not be compatible with the NZXT H6 Flow RGB case due to its 38mm radiator thickness, whereas the H6 Flow case only supports radiators up to 30mm thick. However, some users may have managed to install it with specific modifications or configurations. For a trouble-free installation, it is advisable to check the exact specifications of the enclosure and cooler.
Automatically generated from the .
Helpful answer
Hello Albert
A bracket for the socket 1200 is unfortunately not included, but it is possible to operate the AIO with LGA 1200, see link:
https://www.arctic.de/1200-115X-...
Hope I could help you :)
Helpful answer
I was able to carry out a search and unfortunately the manufacturer does not use different EAN codes or manufacturer numbers here. So unfortunately it is not possible to separate them.
Helpful answer
It should be enough for an Intel i9 - no CPU generates much more waste heat...
Galaxus
1 year ago
It is not possible to mount the radiator of the "Liquid Freezer III 420 A-RGB" from Arctic directly onto a fan from Lian Li, as the radiator and the fans of the Liquid Freezer III are designed as an integrated unit. The fans are pre-installed and their cables are hidden in the hose sheathing, making installation with the cooler's own system simple and straightforward.
If you want to use a Lian Li fan, it would need to be specifically compatible with the Liquid Freezer III's radiator, but this is not the case as the configuration and connections are specifically designed for the Arctic system.
Automatically generated from the .Galaxus
1 year ago
Helpful answer
The hoses of the Liquid Freezer III 240 could press on the SSD device on some motherboards, especially if they are equipped with oversized SSD coolers in the M.2_1 slot. However, Arctic offers a suitable M.2 cooler free of charge to resolve this incompatibility.
Automatically generated from the .
Galaxus
1 year ago
The "Liquid Freezer III - 360 A-RGB" from Arctic comes with pre-installed radiator fans in a push configuration. Three 120mm A-RGB fans are installed.
These fans are configured specifically for the Liquid Freezer III cooling system and are not available separately in Arctic's standard range. However, replacement fans or additional fans can be requested from specialised dealers or directly from Arctic if they are available as spare parts. However, it should be noted that the integration and compatibility of these fans with the cooling system must be ensured.
Automatically generated from the .30 of 55 questions