EUR244,–
Fractal Define R5 Black
ATX, mATX, Mini-ITX
Questions about Fractal Define R5 Black
What would you like to know?
0 questions and answers
Helpful answer
So I had no problems screwing my new power supply unit into it.
This should be possible, for larger ones (in my case the Arctic Freezer 360) a cover must be removed additionally. Picture 6 should show how much space a 280 takes up (top without cover, there should still be some air).
Helpful answer
The Fractal Define R5 Black is an empty case l, so nothing works without the appropriate HW!
Helpful answer
Unfortunately this is not possible.
We are currently unable to offer replacement hard drive enclosures for this PC case.
Such an antenna is normally connected to the board at the back, at the 2 round golden plugs.
Ja, ist möglich. https://static.digitecgalaxus.ch/Files/5/2/6/5/5/1/2/Define%20R5%20Black_18.jpg?fit=inside%7C828:414&output-format=progressive-jpeg https://static.digitecgalaxus.ch/Files/5/2/6/5/5/1/7/Define%20R5%20Black_12.jpg?fit=inside%7C828:414&output-format=progressive-jpeg
Auf der Oberseite der Frontabdeckung hat es 2 USB 3.0 + 2 USB 2.0: http://www.fractal-design.com/home/product/cases/define-series/define-r5-black http://www.fractal-design.com/media/014f026e-b091-4e22-8a59-161fcc1d8c75
Helpful answer
Hello No, that's not possible. At least not without choking. At 32.7cm (specs RTX 2080 Trio MSI) you are at the full HDD cage. If you remove it, you have a full 44cm. I would recommend a maximum of about 30cm with the HDD cage. I now have a GTX 970 in it (28cm). The R5 case is a HDD monster though. It depends on how many HDDs and SSDs you want to install. Even if you remove the middle 4 HDD cage, you still have room for 2x2.5" (on the back of the mainboard plate + 3x 3.5" or 2.5" in the lower cage and 2x5.25" mounting bays. Kind regards Thomas
I don't know if the whole harddrive and diskdrive bay can be removed to install a 360 radiator, and the third 120mm fan has no cut-out in the front. I would take another case for it.
Helpful answer
yes it should fit because it is an atx mainboard and the case supports atx ,matx miniatx
If you have fans mounted on the top, I would clean them thoroughly. If not, I would check whether the side parts can be screwed on tighter.
According to the manufacturer Factal, a radioator up to max. 420mm can be installed at the top of the enclosure. The Hydro H100i v2 is 276mm long and therefore fits without any problems, even with built-in 5.25" bays. The height of 55mm is also not exceeded. I have also chosen this case/cooler combination and will order it soon :)
17 of 17 questions