EUR859,90
Philips 499P9H/00
5120 x 1440 pixels, 49"
Questions about Philips 499P9H/00
What would you like to know?
0 questions and answers
Good question, I wonder too.... The answer must be there : https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32010R1062&from=EN with 45W, 40dm2 as monitor (Pbasic=15W) I find EEI Energy Efficiency Index = 0.239 => Class A (almost A+) maybe I am wrong?
Helpful answer
A question that also interests me in view of an upcoming comparable set-up. Because the monitor and the X360 (G4) have not yet arrived, here's a guess: According to the manufacturer, the Intel UHD 620 supports up to 4096x2304 pixels @60Hz on the display port - i.e. around 9.4 million pixels - whereas the 499P9H/00 can "only" display around 7.4 million pixels (5120x1440). So it should at least be possible from the performance of the UHD 620. In the past, it has helped to install the monitor profile for Windows. This can be found on the Philips support site (here: https://www.philips.ch/c-p/499P9H_00/brilliance-curved-superwide-lcd-display-im-format-329/support) under "Software and drivers" as a "version: 499P9.zip file" from 15 January 2019. To do this, unzip the ZIP file and proceed according to the instructions (find the monitor in the device manager and update the device driver with the downloaded and unzipped driver). Good luck and (also out of self-interest) thank you for a short feedback...
Helpful answer
Voila : Philips Monitor 439P9H/00 (3840 x 1200 pixels)
Helpful answer
I have the BenQ ScreenBar and it holds quite well on the monitor. You can place the ScreenBar a little to the side of the camera, not perfect but it holds well. To be honest, the camera is too bad for me to use it.
It's not worth it, a completely new monitor is cheaper.
Helpful answer
I use the RegionToShare app (https://www.microsoft.com/store/productId/9N4066W2R5Q4?ocid=pdpshare). This allows me to share a region of the screen. I use FancyZones from Microsoft PowerToys to ensure that the windows are always the right size. It works wonderfully, but the CPU performance deteriorates after sharing content for a longer period of time.
Helpful answer
Check/replace cable. My MacBookPro 14", M1, is connected via USB-C and I have the full resolution at 70 Hz.
My desk is 80cm deep. When I sit at the table normally with the mouse and keyboard, my nose is around 65-70 cm away from the screen. That works for me.
I wouldn't recommend it. It's a gamer's cucumber. Pre-order varifocals for office use.
I can see USB-C in the specs and I can confirm the one I bought has it. You should be able to find pictures of the connections panel by googling it. In general I recommend this product as long as you don't have to do richly nuanced, pro-level color work.
Helpful answer
Yes, I had the same problem and was able to solve it with an 8k cable (isn't one supplied, then this one would work).
In a warranty case, the process is under the management of the third party dealer. However, the registration can be carried out with us in the customer account.
Thank you very much for your comment. The specifications will be adjusted as soon as possible.
Helpful answer
you can tell the post office what time you want them to deliver...ex....wants the monitor to be delivered on saturday at 2pm...never had any problems yet
The problem is not the monitor. It's more to do with the way the MacBook recognises the external monitor. I have the same problem with my work laptop and my work monitors. Have you checked the monitor sleep mode? For me, I turn the monitor off and on again and then wake up my laptop and it usually works fine. Sorry for my poor German
Helpful answer
When buying a cable, be careful not to exceed a length of 3m. There is a limit for Power Delivery. The USB-C cable must also be suitable for transmitting 100 watts; cheap cables can cause problems. It must also be capable of at least 5A, which is necessary for 100 watts. Something like this could work, it has 5A but is only 2m. Delock USB-C - USB-C (2 m)
That's correct. with monitor at its lowest height, there is an approx 5cm gap between the bottom of the monitor and the desk which the stand is on. That's correct. With monitor at its lowest height, there is an approx 5cm gap between the bottom of the monitor and the desk on which the stand is on.
Helpful answer
Never have any problems with charging the devices. the screen is simply a top product.
Good morning, I can't say whether it works with a 980TI. However, with my old GTX 960 I use 5120x1440 with 60 Hz without any problems.
Hello again Ingo Fiedler, yes, this is also possible with this monitor. Greetings
Helpful answer
Hi, I use the monitor with a Dell XPS-13 (Intel i7-1065G7 onboard graphics) via USB-C and it works perfectly, both resolution and Ethernet. However, there is a catch with the Gigabit Ethernet: The monitor is delivered in USB 2.0 mode by default - this allows you to achieve the promised 60 Hz at native resolution (70 Hz for me), but Ethernet is limited to ~ 300 Mbps. If you switch to USB 3.0 in the OSD, you can actually achieve 1 Gbps internet speed without any problems - but the refresh rate is limited to an unattractive 30 Hz. This is also stated in the official operating instructions (page 13). That's why I use WiFi again instead of Ethernet, because it gives me ~700 instead of ~300 Mbps in USB 2.0 mode and I don't have to do without 60 Hz. Conclusion: If you want this monitor, a refresh rate of 60 Hz and Gigabit Ethernet, you won't get around a separate USB-C docking station.
Helpful answer
I have a MacBook Pro with this monitor and keep having problems with the resolution. It's basically due to the faulty macOS Big Sur. However, if you take the USB C cable that comes with the monitor, download the Switch Res X tool and try a bit, the Mac usually accepts the resolution. Sometimes it helps to plug the monitor in and out of the USB C port 4 or 5 times or to change the port.
30 of 71 questions