Best E3D Online products in the 3D printer accessories category

On this page you'll find a ranking of the best E3D Online products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. E3D Online High Flow ObXidian HotEnd for Bambu Lab X1/P1 Series

E3D High Flow ObXidian HotEnd for Bambu Lab X1/P1 SeriesThe ObXidian High Flow HotEnds from E3D and Bambu Labs are an official collaboration between E3D and Bambu Labs, bringing you one of the most compact, lightweight, and most importantly, powerful HotEnds ever.High FlowThere's no denying that Bambu Lab's X1 and P1 series printers are built for speed. However, the motion system, as remarkable as it is, still has room to improve. This is where the E3D High Flow technology comes into play. This means you can expect more reliable and consistent extrusion at the same speeds, or increase the volume flow limit in the slicer to fully utilise the motion system's capabilities.Smooth and hardE3D has added its E3DLC coating to the nozzle and heating block, providing even more abrasion resistance for all your fibre-filled fun and creating a non-stick protective layer to prevent plastic build-up on the nozzle. All of these new features are in the same form factor as your stock Bambu; just keep using your temperature sensor and heating pads, and it installs in place with no adjustments to the mount or parts cooling required.Compatibility: The E3D High Flow HotEnd is compatible with the X1, X1 Carbon, X1E, P1S and P1PWhat's in the box:1 x Metal only HotEnd1 x Thermal Paste1 x Silicone Sock. 

2. E3D Online E3D Revo HTX Nozzle

Revo HTX Nozzle HTX nozzles are high-temperature, abrasion-resistant nozzles. Much like ObXidian, HTX nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the transmission of heat to the heatsink. The nozzle is then coated with Chromium Nitride to provide abrasive resistance up to 500°C. Frustration-free Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification HTX nozzles are grey in colour and have their sizes engraved into them with easy-to-read numbers, so there are no confusing identification markers to learn!. 

3. E3D Online E3D RapidChange Revo™ Brass 1.75mm 0.4mm Nozzle

Experiment freely. With nozzle swapping this easy, you’re free to experiment with nozzle sizes you might not have used before. Set your 3D printer up for ultra-fine or ultra-thick extrusion widths in no time at all. Print large objects in less time, or tiny objects with high resolution.

Frustration-free. Each Revo Nozzle is a preassembled nozzle and heatbreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing!

Rapid identification. Identify nozzle sizes at a glance thanks to a colour-coded silicone sock. Plus, each Revo Nozzle has its size engraved into it with easy-to-read numbers, so there are no confusing identification markers to learn!

An expanding range. We’re ready to make RapidChange Nozzles in any size. At launch, we’re introducing brass nozzles in 0.25mm, 0.4mm, 0.6mm and 0.8mm, with many more compatible nozzles to follow later. Wear-resistant and high flow variants are already on our roadmap and will follow over time.

Please note:

Revo™ Nozzles are not compatible with V6-style heaterblocks

You may need to adjust the Z offset when changing nozzles. 

4. E3D Online E3D Volcano HotEnd- 1,75mm - 12V- Bowden

Volcano HotEnd- 1,75mm - 12V- BowdenThe Volcano HotEnd is the solution to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables you to print bigger and stronger parts, faster. If you've got a printer with a large build volume then the Volcano HotEnd is a must-have.CustomisableThe Volcano HotEnd maintains as much compatibility with the E3D ecosystem as possible. You can choose from a range of upgrades including temperature sensors and heater cartridges, as well as different nozzle materials and sizes for whatever use case you require.FasterThanks to its larger melt zone, the Volcano HotEnd enables users to print thicker and wider tracks which results in dramatically reduced print times.StrongerIn addition to reduced print time, the thick tracks printed by Volcano have greater interlayer adhesion and bond to one another with improved strength. Parts printed are extremely strong, less brittle and feel much more sturdy than standard prints.BiggerWith the print volumes increasing and interest of larger 3D printed items such as furniture and automotive parts, comes a requirement to decrease the overall print time. The Volcano heater block was designed to make printing large parts more efficient by allowing the use of larger nozzle sizes and higher volumetric flow rates.Whats Included• 1 x V6 heatsink 1.75mm or 2.85mm• 1 x Volcano aluminium HeaterBlock• 1 x Stainless steel HeatBreak 1.75mm or 2.85mm• 1 x Brass volcano nozzle 0.8mm 1.75 mm or 2.85mm• 1 x V6 aluminium heater block• 1 x Heater cartridge 12V or 24V• 1 x Thermistor cartridge• 1 x Thermistor extension cable• 1 x Collet clip 1.75m or 2.85mm• 1 x Collet clip 1.75mm or 2.85mm• 1 x V6 fixings kit• 1 x PTFE tube• 1 x V6 Fan duct• 1 x 30 x 30 x 10 mm fan 12V or 24V• 1 x M3 grub screw• 1 x M3 washer• 1 x Thermal paste• 1 x Volcano sock• 1 x Cable tie. 

5. E3D Online E3D Revo™ Prusa Mini

E3D Revo Prusa MiniUpgrade your Prusa Mini 3D printer with Revo to unlock rapid, tool free nozzle changing. This Coldside kit includes a Revo ready drop-in replacement heatsink plus everything you need to securely mount the new setup to your printer, including a 3D printed bracket.Pair your Revo heatsink with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box.All Hotside packs come with your heating and sensing elements plus a variety of nozzles for you to start quick swapping with. Select from the following options: Starter: Ideal for users printing at standard speeds with PLA, PETG and ASA High flow: Perfect if you're looking to push your MK3's print speed capabilities to the limit High Flow X: All the benefits of the High Flow pack with the bonus of abrasive resistance for printing with fibre filled materialsWhat's in the Box? - Coldside only1 x Collet1 x Collet clip1 x Heater Extension1 x Thermistor Extension1 x Revo Micro Sink1 x 100mm PTFE1 x Prusa Mini Bracket2 x M3 Square nutStarter Pack1 x 0.6mm Brass Revo Nozzle1 x 0.4mm Brass Revo Nozzle1 x 40W HeaterCore 24VHigh Flow Pack:1 x 0.4mm High Flow Brass Nozzle1 x 0.6mm High Flow Brass Nozzle1 x 60W HeaterCore1 x Fully-Loaded Sock Pack1 x 0.4mm Brass NozzleHigh Flow X Pack:1 x 0.4mm HF ObXidian Nozzle1 x 0.6mm HF ObXidian Nozzle1 x 60W HeaterCore1 x Fully-Loaded Sock Pack1 x 0.4mm Brass Nozzle. 

6. E3D Online E3D Volcano ObXidian Nozzle - 1 pcs

Volcano ObXidian With a wear resistance that is orders of magnitude higher than any other E3D nozzle, ObXidian is really hard. Several orders of magnitude harder than Nozzle X and indeed any other generic hardened steel nozzle. This is achieved by pairing a tool steel insert with E3DLC™ coating. This specially formulated coating also embeds non-stick properties into the Nozzle itself. Meaning considerably less plastic build up around the Nozzle. 

7. E3D Online E3D Revo™ Hemera XS

E3D Revo Hemera XSHemera XS is a classic E3D Extruder, its custom stepper motor means it can move faster on your 3D printers motion system with less inertia than its predecessor Hemera, reducing print artefacts such as ghosting. Hemera also has a custom mounting system which means a range of accessories can be mounted such as bed levelling probes, expansion boards, and more!Capable with wide range of 3D printing filamentsEnjoy excellent performance with all 3D printing materials, particularly challenging materials like flexibles and abrasives. Enhanced extrusion and retraction control means you can 3D print soft flexibles with a shore hardness as low as 75A!Backwards compatibleThe heatsink geometry for Revo Hemera XS accepts Revo Nozzles as well as V6 nozzles with a Hemera HeatBreak (sold separately).All the force you needHemera XS has all the extrusion force you need to drive the entire E3D ecosystem, including high flow HotEnds like SuperVolcano and Revo High Flow Nozzles.Less likely to strip filamentIn the event of a jam, the filament drive mechanism for Hemera XS will stall instead of stripping filament, making it easier to recover and get 3D printing again.What's in the Box? - Coldside Only1 x Hemera XS1 x Motor cable1 x Hemera Fixings kit1 x 40x40mm fan1 x cable tieStarter Pack1 x 0.6mm Brass Revo Nozzle1 x 0.4mm Brass Revo Nozzle1 x 40W HeaterCore 12V or 24VHigh Flow Pack:1 x 0.4mm High Flow Brass Nozzle1 x 0.6mm High Flow Brass Nozzle1 x 60W HeaterCore1 x Fully-Loaded Sock Pack1 x 0.4mm Brass NozzleHigh Flow X Pack:1 x 0.4mm HF ObXidian Nozzle1 x 0.6mm HF ObXidian Nozzle1 x 60W HeaterCore1 x Fully-Loaded Sock Pack1 x 0.4mm Brass NozzleGenius 400 kit1 x 0.40mm ObXidian Nozzle1 x 0.40mm Non-Planar Nozzle1 x 0.60mm High Temp Abrasive (HT-A) Nozzle1 x 0.60mm High Flow ObXidian Nozzle1 x 60W HeaterCore1 x High-Temp HeaterBlock1 x High-Precision Heater Cartridge1 x PT100 or PT10001 x 0.25mm Brass Nozzle1 x Fully Loaded Sock PackGenius Metal Kit1 x 0.40mm ObXidian. 

8. E3D Online E3D Revo™ Six

E3D Revo SixIts time to upgrade your existing V6 setup to unlock rapid, tool free nozzle changing with our latest technology, Revo. This Coldside kit includes a ready drop-in replacement Revo heatsink plus everything you need to securely mount the new setup to your printer. Pair your Revo Six sink with one of our carefully curated Hotside packs to ensure your printing needs are met, straight out of the box.All Hotside packs come with your heating and sensing elements plus a variety of nozzles for you to start quick swapping with. Select from the following options: Starter: Ideal for users printing at standard speeds with PLA, PETG and ASA High flow: Perfect if you're looking to push your 3D printer’s print speed capabilities to the limit High Flow X: All the benefits of the High Flow pack with the bonus of abrasive resistance for printing with fibre filled materials Genius 400: A hobbyist’s playground: high temperature, high flow and abrasive printing in one kit Genius Metal: The ultimate hobbyist’s playgroundWhat's in the Box? - Coldside only1 x Revo Six Sink1 x Collet1 x Collet clip1 x Heater Extension1 x Thermistor Extension1 x Fan duct1 x 100mm PTFEStarter Pack1 x 0.6mm Brass Revo Nozzle1 x 0.4mm Brass Revo Nozzle1 x 40W HeaterCore 24VHigh Flow Pack1 x 0.4mm High Flow Brass Nozzle1 x 0.6mm High Flow Brass Nozzle1 x 60W HeaterCore1 x Fully-Loaded Sock Pack1 x 0.4mm Brass NozzleHigh Flow X Pack1 x 0.4mm HF ObXidian Nozzle1 x 0.6mm HF ObXidian Nozzle1 x 60W HeaterCore1 x Fully-Loaded Sock Pack1 x 0.4mm Brass NozzleGenius 400 kit1 x 0.40mm ObXidian Nozzle1 x 0.40mm Non-Planar Nozzle1 x 0.60mm High Temp Abrasive (HT-A) Nozzle1 x 0.60mm High Flow ObXidian Nozzle1 x 60W HeaterCore1 x High-Temp HeaterBlock1 x High-Precision Heater Cartridge1 x PT100 or PT10001 x 0.25mm Brass Nozzle1 x Fully Loaded Sock PackGenius Metal Kit1 x 0.40mm ObXidian Nozzle1 x 0.40mm Non-Planar Nozzle1 x 0.60mm High Temp Abrasive (HT-A) Nozzle1 x 0.60mm HF ObXidian Nozzle1 x 0.40mm Di. 

9. E3D Online E3D Revo™ LGX Extruder - 24V - Fully Loaded Nozzle Kit

Revo Micro with adaptor and extruderRevo LGX is a world-class extrusion system, thanks to the powerful combination of Revo Micro and Bondtechs LGX extruder. Revo Micro ensures smooth and consistent filament flow, resulting in high-quality prints with every use. Its lightweight and compact design provides excellent thermal performance, reducing heat-up times and preventing heat creep, even during prolonged printing sessions. The LGX Extruder is renowned for its large-gear design that delivers outstanding torque and precision. This extruder is built to handle a wide range of filament types and provides excellent grip, ensuring flawless and reliable filament feeding. The LGX Extruders robust construction means smooth filament delivery, reducing the risk of clogs and improving overall print quality.Rapid nozzle changingChange nozzles at room temperature using just your fingers. No complex tools, no hot tightening. Revo Nozzles are a factory sealed nozzle and heatbreak in one, so they’re easy to fit and can’t leak material when in use. Full range of standard, high flow and abrasive nozzles available.Performance at the coreThe Revo HeaterCore heats up in seconds. A positive temperature coefficient (PTC) means the Revo HeaterCore doesn’t risk melting at extreme temperatures: power reduces as it gets hotter, so hazards are reduced in the event of a thermal runaway.LGX Extruder Key Featurese-steps value : 400 using 16 microsteps; 800 using 32 microsteps.Drive wheels : hardened steel;Materials compatibility : abrasive; rigid; semi-flexible; flexible; and soft.Mounting holes : M3Mounting patterns : bottom anterior (2 points); left (2 points), right (2 points), front (4 points), back (4 points)Holes on the sides of the LGX™ : 5 mm depthHoles on the bottom of the LGX™ : 12 mm depthMax tightening torque on the extruder screws is 0.3 NmPlease note:The Revo Micro fan must be connected using the 5V regulator unless connecting directly to a 5V pinYou may need to adjust your. 

10. E3D Online E3D RapidChange Revo™ Voron - 1.75mm, 12V Fully Loaded Nozzle Kit

We’ve developed this Revo-compatible cold side in collaboration with Team Voron. It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. It’s compatible with our Revo ecosystem, so you can change nozzle size without tools or hot tightening using just your fingers.

- Uses Revo Nozzles – change nozzles cold, no tools, no hot tightening

- Works with a Revo HeaterCore for faster heat-ups

- Rigid mounting using 4 x M3 x 0.5 bolts

- Ultra-lightweight construction for improved speed performance

- Ideal HotEnd for Voron StealthBurner

- Heatsink is licensed under GPL V3

Ready for Revo. A groove at the bottom of the sink accepts a Revo HeaterCore spring. It’s compatible with our Revo ecosystem, so you can change nozzles without tools or hot tightening using just your fingers.

Complements your Voron. Includes an anodised red aluminium heatsink to complement your Voron accented parts.
Rigid mounting. This is a rigid mounted design that uses four M3 x 0.5 bolts to secure to your Voron 3D printer.

Compatible with:

- Voron 1

- Voron Trident

- Voron Switchwire

- Voron 2.4

- Voron Legacy

- Voron 0.1

Open-source design. We’ve made this cold side (everything above the HeaterCore, including the receptacle for the Revo Nozzle) open hardware licensed under the GPL V3. This means if you have an alternative design for this, you are able to work with it.
See it in action:

Please note:

- For full mounting instructions and STL files for Voron printed parts visit: https://docs.vorondesign.com/

- You may need to adjust your Z offset when changing nozzles. 

E3D Online E3D RapidChange Revo™ Voron - 1.75mm, 12V Fully Loaded Nozzle Kit
3D printer accessories
214,81 EUR

E3D Online E3D RapidChange Revo™ Voron - 1.75mm, 12V Fully Loaded Nozzle Kit

See all products