Best Finder products in the Relays category
On this page you'll find a ranking of the best Finder products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Finder Impulse switch.f.DIN-slide
Finder Impulse switch for DIN rail 20.21.9.024.4000 Manufacturer: Finder Name: Impulse switch for DIN rail 1S 20A 24VDC Type: 20.21.9.024.4000 Function: mechanicalSwitch Mounting type: DIN rail Width in units of pitch: 1 Installation depth: 58.4 mm Number of contacts as normally open: 1 Control voltage 1: 24 V Control voltage type 1: DC Frequency of control voltage 1: 0 Hz Rated switching current: 16 A Supply voltage: 24 V Voltage type of supply voltage: DC Max. Incandescent lamp load: 2000 W Max. Fluorescent lamp load: 1000 VA Max. Fluorescent lamp load (duo circuit): 1000 VA Max. fluorescent lamp load (parallel compensated): 1000 VA Fluorescent lamp load (parallel compensated): 750 VA Max. switching current (cos phi : 0) Max. switching current (cos phi : 0.6): 12 A Suitable for manual operation: yesFinder impulse switch for DIN rail 20.21.9.024.4000: more detailsInterrupter switch for 35 mm rail, 1 NO contact for 16 A / 250 V AC, contact material AgSnO², max. switching capacities at 230 V AC: AC1 4000 VA, AC15 750 VA, incandescent and halogen lamps 2000 W, fluorescent lamps compensated 750 W, fluorescent lamps uncompensated 1000 W, energy saving lamps 400 W, LED (230 V AC) 400 W, LV halogen lamps or LED with ECG 400 W, LV halogen lamps or LED with CCG 800 W, coil data: 24 V DC, 5 W, 105 Ohm, width 17.5 mm, switching sequence: on/off, test button and mechanical switch position indicator, relay protection class: IP 20 , EAN: 8012823266695.
2. Finder Voltage monitoring relay 220-240V ac,1P
Monitoring applications = voltage
Supply voltage = 220 → 240 V
Contact arrangement = 1-pole changeover switch
voltage sensitivity = overvoltage protection, undervoltageprotection
Electrical phases = 1
Voltage measuring range = 170 → 270 V ac
Delay time = 0.5 → 60 s
Frequency scanning range = 50 → 60 Hz
Voltage detected min. = 170 V
70 series electronic voltage/phase loss and rotation monitoring relays for single-phase and three-phase applications. 70.11 - 70.31 - 70.41 Series - Electronic voltage monitoring relays for single-phase and three-phase applications. Multifunctional types enable monitoring of undervoltage, overvoltage, window mode, phase rotation, phase loss, asymmetry and neutral loss Positive safety logic Front panel selectors and trimmers for setting all functions and values LEDs for clear indication 1 relay output (changeover contact), 6 or 10 A cadmium-free contact material. 70.61 Series - Electronic phase loss and rotation monitoring relays for three-phase applications. Universal voltage monitoring (UN from 208 V to 480 V, 50/60 Hz) Phase failure monitoring Positive safety logic 1 relay output (changeover contact), 6 A and 2 relay outputs (changeover contact), 8 A Mounting on 35 mm rail (EN 60715).
3. Finder Contactor 63A 2 NO + 2 NC, 230-240vac/dc
Coil voltage = 240V ac
Contact arrangement = 2-pole changeover contact
Switching current = 63 A
Connection type = screw
Series = 22 Series
Switching voltage ACmax = 440V ac
Application Type = Power
Length = 53.5mm
Depth = 63.1mm
Height = 91mm
Dimensions = 53.5 x 63.1 x 95.8mm
Switching capacity AC max = 24 kVA
22.44 and 22.64 series - modular contactors. Finder 22 series 4-pole modular contactors, rail mounted, 4-pole. 40-63 A Continuous operation for coil and contacts AC/DC quiescent coil with varistor protection Protective separation (reinforced insulation) between coil and contacts Complies with EN 61095:2009 and EN 60947-4-1:2009 35-mm rail-mount screw terminal Additional modules available for 22.44 and 22.64 (800-2916 and 800-2925).
4. Finder Time relay series 80.41 0,1s - 20h
Supply voltage = 24 → 240 Vac/dc
Time range = 0,1 → 20 s, 0,1 → 20 min., 0,1 → 24 h
Operating mode = switch-off delay with control signal
Mounting type = DIN rail
Numberof time functions = Simple
Number of contacts = 1
Series = 80 Series
Time period = hours, minutes, seconds
Power supply = External
Contact arrangement = 1-pole changeover switch
Max. current = 16 A
Connection type = screw mounting
Voltage min. = 16.8 V ac/dc
Voltage max. = 265 V ac/dc
width = 17.5mm
80 Series - Off-delay switch. Function - 211 6 Time ranges Wide voltage range Contact material: AgCdO.
5. Finder RELAY SERIE 40
Coil voltage = 24V dc
contact arrangement = 1-pole changeover contact
Switching current = 10 A
Connection type = through-hole mounting
Coil resistance = 900 Ω
Switchingvoltage AC max = 400V ac
Application type = printed circuit board
Length = 29mm
Depth = 12.4mm
Height = 25mm
Dimensions = 29 x 12.4 x 25mm
Operating temperature max = +85°C
SEV, VDE, CSA, UL recognized component for Canada and USA, GOST, IMQ, RINA. Miniature relays for PCB mounting 8-10-12-16 A. A selection of miniature PCB mount relays from Finder. Features and benefits. 8 mm, 6 kV insulation coil/contact. Flux resistant: RT II. Dimensions (HxWxD): 25 x 29 x 12.4 mm. Product application information. Medicine and dentistry. Control panels. Panels for power distribution. Toys. Automation for blinds, grilles and shutters. Door and gate openers. Electronic circuit boards. Vending machines.
6. Finder Retaining bracket
Finder retaining bracket 095.91.3 Manufacturer: Finder Designation: retaining bracket blue 'Variclip' Type: 095.91.3 Type of accessory/spare part: Retaining bracketFinderretaining bracket 095.91.3: more detailsPlastic combination bracket 'VARICLIP\' for sockets 95.83.3/30, 95.85.3/30, 95.93.3/30 and 95.95.3/30, for relay series 40, color blue EAN: 8012823283531 Supplied: Finder retaining clip blue "Variclip" 095.91.3, packaging unit: 1 piece, EAN: 8012823283531.
7. Finder 40.62.9.110.0000 Print relay 110 V/DC 10 A 2 CO contact 1 pc.
Finder 40.62.9.110.0000 Print relay 110 V/DC 10 A 2 CO contact 1 pc. (40.62.9.110.0000).
8. Finder Relay
Finder 43.41.7.006.4000 Print relay 6 V/DC 10A 1 CO contact 20pcs.
9. Finder Relay interface module push-in terminals
Coil voltage = 24V dc
Switching current = 8 A
Mounting type = DIN rails
Connection type = plug-in connector
Length = 15.8mm
Depth = 66.8mm
Height = 95.5mm
Dimensions= 15.8 x 66.8 x 95.5mm
Contact material = silver alloy
Input current = 20mA
Number of poles = 2
CE, CSA, Gost, IMQ, VDE. Coupling Relay, Series 4C. Ideal interface for PLC and electronic systems Easy change of relay by plastic retaining clips Indication of supply status and coil suppression module as standard 440 Vac switching voltage Width: 15.8 mm Contact material: silver-nickel.
10. Finder Analogwert-Geber 19.50.0.024.0000
Finder analogue value transmitter 19.50.0.024.0000 (195000240000).