Sanding, fast-curing 2K-PUR structural adhesive for plastic repair in original equipment manufacturer quality. Pot life is approximately 120 seconds. Excellent for the repair or bonding of all common plastic parts (thermoplastics, thermosets) used in vehicle construction, household, hobbies, and gardening.

Application:
1. Thoroughly clean the parts to be processed with water and then dry them.
2. For damaged areas with cracks, drill holes of 4 – 5 mm in size at each end.
3. If the component is painted, remove the paint and primer on both sides about 3 cm around the damaged area. For unpainted parts, roughen the bonding surface with sandpaper (80 – 120 grit).
4. To ensure sufficient adhesive penetrates the repair area for crack damage, a V-notch should be cut from the outside with a knife.
5. The area to be processed can be repaired or bonded with the adhesive. First, treat the back side and then the front side of the bonding surface.
6. After approximately 15 – 30 minutes, the repaired or bonded components can be further processed, for example, by sanding, drilling, or threading.