Clamping force of up to 8,500 N with a tightening torque of 40 Nm. Long lifespan thanks to the heat-resistant special pressure plate with a sintered steel insert, pivotable up to 35°. Extension of 200 mm.

Increasing clamping forces with larger extensions and longer spans. These are the demands that the original BESSEY high-performance clamps must meet every day. In steel, boiler, vehicle, or shipbuilding. But also in heavy timber construction, glued beam constructions, or carpentry. Essentially, wherever robust or heavy parts require special clamping forces and maximum safety. Developed based on the proven original BESSEY all-steel screw clamp, the original BESSEY high-performance clamps meet all requirements with excellence. Every single day!

Hazard warnings: Clamping tools are not suitable for lifting, pulling, or transporting. Clamping tools should only be tightened by hand without additional aids. Improper use can cause personal or material damage. Never modify or alter clamping tools; use them only in their original condition. Only use original spare parts if needed.

Care instructions: Regular maintenance is necessary – only then can secure hold be guaranteed (no slipping of the sliding arm). Generally, remove dirt. Keep the rail free from grease, oil, or dried glue, waxes, and silicone-based release agents. Clean and oil the spindle regularly. If gloss forms on the rail, roughen both narrow sides with sandpaper (100 grit). Regularly clean and oil the pressure plate.

Application: Metal construction, locksmith work, hall construction, high-performance clamping.

Material / Surface: Fixed and sliding arms made of heat-treated steel, galvanized. Spindle with trapezoidal thread made of rolled and heat-treated steel, phosphated. Knob made of galvanized steel. Pressure plate made of phosphated steel.