Danfoss Thin Bed Heating Mat DTIR 7m

Manufacturer: Danfoss
Designation: Thin Bed Heating Mat 150 W/m²
Type: DTIR 7m
Design: Heating Film
With Carrier Mat: yes
Heating Cable Fixation: glued
Self-Adhesive: yes
Connection Power: 525 W
Power: 11 W/m²
Heating Cable Load: 11 W/m
Number of Cold Leads: 1
Length of Cold Leads: 4000 mm
Suitable for Wet Rooms: yes
Suitable as Outdoor Heating: no
Suitable as Roof Heating: no
Area: 3.5 m²
Length: 7000 mm
Width: 500 mm
Thickness: 4 mm
With Controller: yes
With Room Thermostat: no
With Floor Temperature Sensor: no

The self-adhesive thin bed heating mat with a connection lead is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 4.0 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large rooms, as there is no need to route back the second connection.

The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection lead is 4.0 m. Cold lead: 4 m, 1.0 mm², Voltage: 230 V, Rated Limit Temperature: 90 °C, Specific Heating Power: 150 W/m², Length Load: 11 W, Insulation: PVC / FEP, Resistance Tolerance: +10% / -5%, Minimum Installation Temperature: 5 °C, Minimum Bending Radius: 6 x dA, Protection Class: IPX7, Approval: EN 60335-2-96, Mat Height: 4.0 mm, Calculation Width: 50 cm, Delivery Width: 48 cm, Area: 3.5 m², 0.5 x 7.0 m, Power: 525 W.