Stiebel Eltron Floor temperature control FTM 100/4 Set Plus Manufacturer :Stiebel Eltron Designation :Floor temperature control 4 sqm, 400W/230V Type :FTM 100/4 Set Plus Design :Heating cable With support mat :yes Fixation of the heating conductor :sewn Self-adhesive :yes Supply voltage :230 V Connected load :400 W Output :100 W/m² Heating conductor load :9 W/m Resistance :130 Ohm Number of PTC thermistors :1 Length of PTC thermistors :4000 mm Suitable for damp rooms :yes Suitable as outdoor heating :no Suitable as roof heating :no Area :4 m² Length :8000 mm Width :500 mm Thickness :3 mm With controller :yes With room thermostat :yes With floor temperature sensor :yes Stiebel Eltron floor temperature control FTM 100/4 Set Plus: more details The thin-bed heating mats with high heating output are used in new builds and renovations for floor temperature control, especially in bathrooms. They are installed directly under the floor covering and quickly provide a pleasantly warm floor surface, independent of the existing heating system. The heating mat is suitable as additional or supplementary heating. COMFORT FEATURES: Due to the low installation height, the heating mat can be installed directly in the tile adhesive under ceramic coverings. The smaller installation width is particularly suitable for small, angled floor plans. In combination with a water-guided underfloor heating system, the comfort of a warm floor can thus also be made possible outside the heating season. The heating conductor is completely sewn onto the self-adhesive support mat and can therefore be laid quickly and easily on the floor. INSTALLATION: The mat may be laid in the bathroom in conjunction with a residual-current device. By cutting the backing fabric to size, the mats can be easily adapted to the individual space conditions. , EAN: 4017212056684.