Stiebel Eltron Floor temperature control FTM 160/2.5 Set Plus Manufacturer :Stiebel Eltron Designation :Floor temperature control 2.5sqm, 400W/230V Type :FTM 160/2.5 Set Plus Design :Heating cable With support mat :yes Fixing of heating conductor :sewn Self-adhesive :yes Connected voltage :230 V Connected load :400 W Power :160 W/m² Heating conductor load :14 W/m Resistance :133 Ohm Number of PTC thermistors :1 Length of PTC thermistors :4000 mm Suitable for damp rooms :yes Suitable as outdoor heating :no Suitable as roof heating :no Area :2.5 m² Length :5000 mm Width :500 mm Thickness :3 mm With controller :yes With room thermostat :yes With floor temperature sensor :yes Stiebel Eltron floor temperature control FTM 160/2.5 Set Plus: more details The set consists of the thin-bed heating mat, a controller and the required installation material. The thin-bed heating mats are used in new buildings and renovations for floor temperature control. They are installed directly under the floor covering and quickly provide a pleasantly warm floor surface, independent of the existing heating system. The heating mat is suitable as additional or supplementary heating. COMFORT FEATURES: Due to the low installation height, the heating mat can be installed directly in the tile adhesive under ceramic coverings. Under carpets and other floor coverings, the installation is carried out in a levelling layer. In combination with a water-guided underfloor heating system, the comfort of a warm floor is thus also made possible outside the heating season. The heating conductor is completely sewn onto the self-adhesive support mat and can therefore be easily and quickly laid on the floor. INSTALLATION: The mat may be laid in the bathroom in conjunction with a residual-current device. By cutting the backing fabric to size, the mats can be easily adapted to the individual space conditions. , EAN: 4017212057797.