Best selling Welding machines from Stahlwerk
This page always stays fresh and updates automatically.
1. Stahlwerk Plasma cutter CUT 50 P
Device features and components: A plasma jet is generated using electricity, which melts the material and is then removed using compressed air. This allows all conductive metals such as standard steel, stainless steel, copper, aluminium, titanium and many more to be cut precisely and effortlessly. Cutting thickness: Depending on the material, cuts of up to 15 mm are possible. Mild steel ST37 up to 15 mm, V2A or V4A up to 8 mm, aluminium up to 5 mm. Scope of delivery: 1 x Stahlwerk CUT 50 P plasma cutter. 1 x Professional plasma hose package P-60 3 metres. 1 x 4-piece plasma accessory set (already pre-assembled on the plasma cutter): 1 x plasma nozzle. 1 x plasma electrode. 1 x ceramic cap. 1 x spacer. 1 x 3 metre earthing cable. 1 x water separator with pressure gauge and quick-release couplings from the device to the water separator, including 6-piece connection set. 1 x 5 metre air connection hose with quick-release coupling. 1 x protective cover. 1 x Teflon tape.
2. Stahlwerk AC/DC TIG 200 ST Digital
TIG / MMA output current: 30-200. protection class: IP21. Insulation class: F. Mains voltage: 230 V AC (+-15%) / 1 ~ (single-phase). Mains frequency: 50/60 Hz. Maximum mains current (I1max) (TIG / MMA): 27.7 A / 39.7 A. Maximum effective mains current (I1eff) (TIG / MMA): 14.5 A / 13.5 A. Weight: 13.04 kg. Dimensions L x W x H (mm) 455 x 220 x 370. mains connection: Schuko type CEE 7/7. standards: IEC 60974-1; EN 60974-10 (Class A). Scope of delivery: 1 x Steelworks AC/DC TIG 200 ST Digital welding machine. 1 x Professional TIG welding torch WP-26F / 3 metre hose package with flexible torch head and kink protection on the gas connection. 1 x TIG TIG accessory set 8 pieces: 3 x gas nozzles sizes: 5, 6, 7. 1 x clamping sleeve size 1.6 mm. 1 x clamping sleeve housing size 1.6 mm. 2 x burner caps - one short and one long. 1 x universal tungsten electrode 1.6 mm. Pre-assembled accessories from the illustration of the welding torch are included in the 8-piece set: 1 x earth cable 3 metres. 1 x electrode holder 3 metres. 1 x wire brush. 1 x slag hammer. 1 x Gas connection hose with quick coupling 5 metres. 1 x Snap-on connection set. 1 x protective cover. 1 x TIG welding rods ER70S G3 steel. 1 x Welding rods ER307Si TIG high-alloy stainless steel. 1 x TIG welding rods ER4043Si5 high-alloy aluminium. 1 x tungsten electrodes / welding electrodes. 1 x pressure reducer. 1 x professional welding helmet.
3. Stahlwerk 4 in 1 combi welder CTM-250 ST fully equipped
Scope of delivery
1 x CTM-250 ST steelworks combi welding machine
1 x WP-26F professional TIG welding torch / 3 metre hose package
1 x TIG TIG accessory set 8 pieces
1 x Professional plasma hose set AG-60/SG-55 3 metres
1 x 3-piece plasma accessory set (this is already pre-assembled on the plasma torch)
1 x water separator with pressure gauge and snap-on quick couplings
1 x connecting hose with snap-on quick-release couplings from the device to the water separator, incl. 6-piece connection set
1 x AK-15 professional MIG welding torch / 3 metre hose package with Euro central connection
1 x 3-piece MIG accessory set (already pre-assembled on the MIG/MAG torch)
1 x earth cable 3 metres
1 x electrode holder 3 metres
1 x wire brush
1 x Gas connection hose with quick-release coupling 5 metres
1 x contact tip M6 x 28 - ø 0.8 mm
1 x contact tip M6 x 28 - ø 1.0 mm
2 x wire guide rollers 0.8 mm & 1.0 mm with V profile (already installed in the device)
2 x wire guide roller 0.6 mm & 0.8 mm with V profile
1 x assembly spanner
1 x Teflon tape
1 x protective cover
1 x AG-60 25-piece wear parts set
1 x MIG MAG AK 15 wear parts set 28 pieces
1 x WIG ER70S G3 steel welding rods
1 x Welding rods TIG ER307Si high-alloy stainless steel
1 x tungsten electrodes / welding electrodes
1 x MIG MAG premium welding wire ER70S-6 SG2 S100/D100 wire reel
1 x pressure reducer
1 x Professional welding helmet
4. Stahlwerk Plasma cutter CUT 70 P IGBT with 70 A & pilot ignition fully equipped
Properties
Plasma: conductive metals e.g. standard steel, copper, stainless steel, brass, aluminium, titanium can be cut without problems.
Cutting capacity up to 25 mm (depending on material): Mild steel ST37 up to 25 mm, V2A or V4A up to 18 mm, aluminium up to 16 mm
CUT Pilot: smooth pilot ignition, no contact necessary
Technical data:
Output current: 20-70 A
Protection class: IP21S
Mains voltage: 400 V AC (+-15%) / 3 Ph
Mains frequency: 50/60 Hz
Maximum mains current (I1max): 13.8 A
Maximum effective mains current (I1eff): 5,3 A
Weight: 11.4 kg
Dimensions L x W x H (mm): 460 x 230 x 365
Mains connection: CEE16 plug
Air pressure: 4 - 6 bar
Air flow: min. 140 L / min
Standards: IEC 60974-1; EN 60974-10 (Class A)
Scope of delivery
1 x Stahlwerk plasma cutter CUT 70 P
1 x professional plasma hose package P-80, 3 metres
1 x 3-piece plasma accessory set (this is already pre-assembled on the plasma torch):
1 x plasma nozzle
1 x plasma electrode
1 x ceramic cap
1 x earth cable 3 metres
1 x spacer with guide carriage
1 x water separator with pressure gauge and snap-on quick-release couplings
1 x Connecting hose with snap-on quick-release couplings from the appliance to the water separator, incl. 6-piece connection set
1 x Air connection hose with Snap-on quick-release coupling 5m
1 x installation spanner
1 x Teflon tape
1 x protective cover
1 x 25-piece P-80 wear parts set (10 plasma nozzles, 10 plasma electrodes, 5 ceramic caps)
1 x WORKER 3-in-1 automatic welding helmet Welding shield
Welding machines
EUR830,99
Stahlwerk Plasma cutter CUT 70 P IGBT with 70 A & pilot ignition fully equipped
Plasma cutter
5. Stahlwerk Combination welding machine MTM-200 ST
Model: MTM-200 ST steelworks welding machine. Output current (TIG / MMA / MIG): 10-200 A (TIG / MMA) / 40-200 A (MIG). TIG duty cycle (40°C): 15% at 200 A / 100% at 77 A. MMA duty cycle (40°C): 10% at 200 A / 100% at 63 A. MIG duty cycle (40°C): 15% at 200 A / 100% at 77 A. Maximum mains current (I1max) (TIG / MMA / MIG): 26.8 / 41.7 / 35.8 A. Maximum effective mains current (I1eff): (WIG / MMA / MIG) 10.4 / 13.2 / 13.9 A. Dimensions L x W x H (mm): 440 x 255 x 360. Mains connection: CEE 7/7 Schuko plug. Standards: IEC 60974-1; EN 60974-10 (Class A). Scope of delivery: 1 x MTM-200 ST steel mill welding machine. 1 x WP-26F professional TIG welding torch / 3 m hose package with flexible torch head and kink protection on the gas connection. 1 x AK-15 professional MIG welding torch / 3 m hose package with Euro central connection. 2 x wire guide rolls 0.8 & 1.0 mm with 'V' profile (already installed in the device). 2 x wire guide rolls 0.6 & 0.8 mm with 'V' profile. 1 x earth cable 3 m. 1 x electrode holder 3 m. 1 x wire brush, 1 x slag hammer. 1 x gas connection hose with quick coupling 5 m. 1 x Snap-on connection set. 1 x protective cover. 1 x MIG MAG 15AK wear parts set 28 pieces. 1 x TIG welding rods ER70S G3 steel. 1 x Welding rods ER307Si TIG high-alloy stainless steel. 1 x tungsten electrodes / welding electrodes. 1 x MIG MAG premium welding wire ER70S-6 SG2 S100/D100 wire reel. 1 x pressure regulator. 1 x professional welding helmet.
6. Stahlwerk CTM-250 ST
The Stahlwerk CTM-250 ST is a versatile 4-in-1 combination welding machine with integrated plasma cutting function. It combines TIG, MIG/MAG and MMA/E manual welding as well as plasma cutting in a compact 200 A inverter and thus covers the most important processes for workshops, assembly companies and ambitious DIY enthusiasts. Numerous welding and cutting parameters can be customised so that you can adapt the device precisely to the material, sheet thickness and work task. In MIG/MAG and cored wire mode, the CTM-250 ST processes solid and cored wire in standard diameters from 0.6 to 1.0 mm (plus 0.9 mm for cored wire) - ideal for processing mild steel, stainless steel and cored wire applications. In DC TIG mode, the inverter enables clean, low-spatter weld seams on unalloyed and high-alloy steels, stainless steel, copper or brass. This is supported by adjustable parameters such as gas feed, gas delay and current increase/decrease. Functions such as hot start and anti-stick function facilitate ignition and prevent the electrode from sticking. Thanks to VRD voltage reduction, overheating protection, intelligent cooling and a robust ST-Guard housing, the device works reliably and safely even in demanding applications. A powerful 4-roller drive ensures a reliable wire feed that transports even thicker welding wires continuously and safely during MIG/MAG welding. Despite its wide range of functions, the device is not suitable for welding aluminium. The integrated 45 A plasma cutter operates with compressed air and achieves cutting capacities of up to approx. 14 mm, depending on the material. This means that not only structural steels, but also stainless steel sheets and metals with rust film or paint can be cut cleanly. The comprehensive accessory package with MIG, TIG and CUT torches, cables and wear parts enables immediate use.
7. Stahlwerk Plasma cutter CUT 60 Pilot IGBT with pilot ignition, fully equipped
Properties
Plasma: conductive metals e.g. standard steel, copper, stainless steel, brass, aluminium, titanium can be cut without problems.
Cutting capacity up to 24 mm (depending on material): Mild steel ST37 up to 20 mm, V2A or V4A up to 16 mm, aluminium up to 13 mm
CUT Pilot: smooth-running pilot HF ignition, no contact with the workpiece necessary.
Technical data
Output current: 20-60 A
Protection class: IP21S
Mains voltage: 400 V AC (+-15%) / 3 Ph
Mains frequency: 50/60 Hz
Maximum mains current (I1max): 11.4 A
Maximum effective mains current (I1eff): 3,6 A
Weight: 11.5 kg
Dimensions L x W x H (mm): 460 x 230 x 365
Mains connection: CEE16 plug
Air pressure: 4 - 6 bar
Air flow: min. 140 L / min
Standards: IEC 60974-1; EN 60974-10 (Class A)
Scope of delivery
1 x Stahlwerk plasma cutter CUT 60 P
1 x professional plasma hose package P-60 3 metres
1 x 4-piece plasma accessory set (this is already pre-assembled on the plasma torch):
1 x plasma nozzle
1 x plasma electrode
1 x ceramic cap
1 x spacer
1 x earth cable 3 metres
1 x water separator with pressure gauge and snap-on quick-release couplings
1 x Connecting hose with snap-on quick-release couplings from the appliance to the water separator, incl. 6-piece connection set
1 x Air connection hose with Snap-on quick-release coupling 5 m
1 x Teflon tape
1 x protective cover
1 x Original 30-piece wear parts set for plasma cutting torch P-60
1 x WORKER 3-in-1 automatic welding helmet Welding shield
Welding machines
EUR609,99
Stahlwerk Plasma cutter CUT 60 Pilot IGBT with pilot ignition, fully equipped
Inverter welder, Plasma cutter
8. Stahlwerk Plasma cutter CUT 80 P Digital 80
Device functions and components: A plasma jet is generated by electricity, which melts the material, and then it is removed with compressed air. Cutting thickness: Depending on the material, cuts of up to 25 mm are possible. Structural steel ST37 up to 25 mm, V2A or V4A up to 10-15 mm, aluminium up to 8 mm. Scope of delivery: 1 x Stahlwerk CUT 80 P digital plasma cutter. 1 x Professional plasma hose package 3 metres with P80 torch. 1 x THC regulator cable. 1 x Guide carriage with spacer. 1 x 4-piece plasma accessory set (already pre-assembled on the plasma cutter): 1 x plasma nozzle. 1 x plasma electrode. 1 x ceramic cap. 1 x spacer. 1 x 3 metre earthing cable. 1 x water separator with pressure gauge and quick-release couplings from the device to the water separator, including 6-piece connection set. 1 x 5 metre air connection hose with quick-release coupling. 1 x protective cover. 1 x Teflon tape.
Welding machines
−22%
EUR599,99 was EUR769,99
Stahlwerk Plasma cutter CUT 80 P Digital 80
Inverter welder, Plasma cutter
9. Stahlwerk AC/DC WIG 200 ST IGBT
TIG / MMA output current: 30-200 A. Protection class: IP21S. Insulation class: F. Mains voltage: 230 V AC (+-15%) / 1 ~ (single-phase). Mains frequency 50/60 Hz. Maximum mains current (I1max) (TIG / MMA): 27.7 A / 39.7 A. Maximum effective mains current (I1eff) (TIG / MMA): 14.5 A / 13.5 A. Weight: 11.5 kg. Dimensions L x W x H (mm): 455 x 220 x 370. Scope of delivery: 1 x steelwork AC/DC TIG 200 ST IGBT. 1 x WP-26F professional TIG welding torch / 3 metre hose package with flexible torch head and kink protection on the gas connection. 1 x TIG TIG accessory set 8-piece: 3 x gas nozzles sizes: 5, 6, 7. 1 x clamping sleeve size: 1.6. 1 x clamping sleeve housing size: 1.6. 2 x torch caps - one short and one long. 1 x universal tungsten electrode. Pre-assembled accessories from the illustration of the welding torch are included in the 8-piece set. 1 x earth cable 3 metres. 1 x electrode holder 3 metres. 1 x wire brush. 1 x slag hammer. 1 x Gas connection hose with quick coupling 5 metres. 1 x TIG welding rods ER70S G3 steel. 1 x Welding rods TIG ER307Si high-alloy stainless steel. 1 x TIG welding rods ER4043Si5 aluminium. 1 x pressure reducer. 1 x Professional welding helmet. 1 x tungsten electrodes/welding rods.
10. Stahlwerk Plasma cutter CUT 50 Pilot IGBT
Plasma: conductive metals e.g. standard steel, copper, stainless steel, brass, aluminium, titanium can be cut without problems. Cutting capacity up to 14 mm (depending on material): Mild steel ST37 up to 14 mm / V2A or V4A up to 8 mm / aluminium up to 5 mm. CUT Pilot: smooth-running HF pilot ignition, no contact necessary. IGBT technology Advantages: powerful, good forward behaviour, high blocking voltage and robustness. Output current: 15-50 A. Protection class: IP21S. Mains voltage: 1 x 230 V AC (+-15%). Mains frequency: 50/60 Hz. Maximum mains current (I1max): 33 A. Maximum effective mains current (I1eff): 13,1 A. Weight: 8 kg. Dimensions L x W x H (mm): 390 x 170 x 275. Mains connection: CEE 7/7 Schuko plug. Air pressure: 3.5 - 4 bar. Air flow: min. 100 litres / min. Standards: IEC 60974-1; EN 60974-10 (Class A). Scope of delivery: 1 x Stahlwerk plasma cutter CUT 50 P. 1 x professional plasma hose package P-60 3 metres. 1 x 4-piece plasma accessory set (already pre-assembled on the plasma torch): 1 x plasma nozzle. 1 x plasma electrode. 1 x ceramic cap. 1 x spacer. 1 x 3 metre earth cable. 1 x water separator with pressure gauge and snap-on quick-release couplings from the device to the water separator, incl. 6-piece connection set. 1 x Air connection hose with snap-on quick coupling 5 metres. 1 x protective cover. 1 x Teflon tape. 1 x Original 30-piece wear parts set for plasma cutting torch P-60. 1 x Welding helmet WORKER 3-in-1 automatic welding helmet welding shield.
Product order
See all products