Top rated RC electronics accessories
This page always stays fresh and updates automatically.
1. Isdt BG-8S Smart Battery Checker
It measures cell voltage, battery cycles, and other parameters. Additionally, it is capable of balancing all cells. Furthermore, the device features a USB port for charging mobile devices. It has a color display that is easily readable even in bright sunlight. It shows cell voltage, battery cycles, and operating parameters via the connection of the XT60i plug, thanks to BattGo technology. It balances cells in auto-balance mode. The charging function has a maximum output of 12 V / 2 A for mobile devices. It captures BEC output voltage and supports protocol analysis for PWM, PPM, and S.BUS. Various connection options for plug types XT60/XT60i, XH2.54 1-8S, XH 2.54 3pin, JST, etc. for voltage measurement and LiHv, LiPo, Li-Ion, LiFe, NiMh/Cd batteries, as well as BEC output measurement.
What our customers think
Pro
- Shows cell voltage
- Can balance cells
2. Hobbywing Programming module OTA
The Over-the-Air programmer fits in your pocket.
The OTA programmer is a module that uses Bluetooth communication technology to transfer data between an ESC and a smart device (Android phone, tablet, etc.). It enables wireless communication between the ESC and the smart device, allowing users to easily program and update the ESC as well as monitor data transfer through this device.
Features / Why You Need This?
- HOBBYWING firmware update via wireless connection.
- Programming through a smartphone or smart devices.
- Access to the user manual for HW support, profile manager, etc.
- Fail-safe function (disables throttle control when OTA programming is activated).
The OTA programming module is compatible with the following HOBBYWING products:
- Some models of the XERUN series and EZRUN series of car ESCs.
- Some models of the PLATINUM series of airplane ESCs.
- Some models of the SEAKING series of boat ESCs.
3. SkyRC Balancer Adapter XH
Swaytronic adapter cable. Application: Found the right battery, but the connector doesn't fit your model? No problem. With the high-quality adapter cables, you can adapt your plug system as desired - and without any soldering effort. Your advantage: With a wide selection of different variants, the adapter cables cover practically all common plug systems. This way, you can save yourself the hassle of re-soldering and always have the right plug system on hand.
4. Isdt PC-4860 Safe Parallel Adapter
The ISDT PC-4860 Safe Parallel Adapter is a specialized accessory designed for simultaneously charging multiple batteries of the same type. This parallel board allows for efficient use of chargers, particularly ISDT models that come with the necessary connection cables. The adapter supports a maximum input current of 40A and provides an output current of up to 30A per port, ensuring a fast and safe charging experience. Additionally, the adapter is capable of balancing cells from 1s to 8s, with a maximum balancing current of 2A. Equipped with an XT60 connector, the PC-4860S is suitable for both indoor and outdoor use, offering a reliable solution for RC enthusiasts who want to charge multiple batteries at the same time.
- Maximum input current of 40A for efficient charging
- Maximum output current of 30A per port
- Supports balancing of 1s to 8s cells
- Equipped with XT60 connector for versatile applications.
5. Creativ Company Pipette set 15 pieces
Pipettes for precise dosing of paints and thinners. With scale. Made of plastic. Length: 15 cm. Capacity: 3 ml. Packaging unit: 15 pieces. Inspirations and ideas for creative individuals. Creativ Company is a Danish company that is now represented in nine other European countries. Its own innovative products from the world of crafting, decorating, and creating delight both creative professionals and beginners alike. Thanks to an international network of suppliers and business partners, Creativ Company meets the high demands of its customers while continuously evolving. The company's products are designed to inspire many hours of fun, play, and learning, making the world a little more creative.
RC electronics accessories
Quantity discount
EUR8,23 per piece for 2 units
Creativ Company Pipette set 15 pieces
6. Swaytronic LiPo voltage detector 1S 8S digital and programmable
LiPo Voltage Tester 1S - 8S digital and programmable. This voltage tester shows you the condition of your battery, or rather the cells, within seconds. It is suitable for 1-8S LiPo, Li-ion, LiMn, and Li-Fe batteries. The voltage measurement has an accuracy of ± 0.01 V. The 1S test mode has a voltage range of 4-15 V. There is a low voltage alarm mode for 2-8S with an alarm setpoint range of 2.7-3.8 V. The weight is 9 g.
Functions: The display shows the total voltage (all cells) as well as the individual voltage of each cell. During operation, the battery tester monitors the battery. The individual cells are continuously checked for their voltage, and the alarm is triggered automatically when the set cell voltage is reached or falls below it. Connect a battery (1-8 cells LiPo) to the balance connector of the battery tester. The voltage tester acknowledges the connection of the battery with two short beeps. The display shows the total voltage of the battery in volts and then switches to the voltage of the individual cells (No 1, No 2, No 3, etc.).
Setting the alarm for the desired cell voltage: Press the button once. The tester displays the currently set voltage value in volts (based on 1 cell). If this value meets your desire, the programming is complete, and the battery tester returns to the default display. If you want to change the alarm value, press the button twice. The battery tester will switch to the next possible value. Repeat this step until the desired setting is displayed.
Programming options: OFF / 2.70 V to 3.8 V in increments of 0.10 V. Press the button once = display of the set alarm value. Press the button twice = switch to the next value. By pressing the button multiple times, you can scroll through all values.
Recommendation: The alarm value should not be set below 3.3 volts, as LiPo batteries are very sensitive to deep discharge.
RC electronics accessories
Quantity discount
EUR12,90 per piece for 2 units
Swaytronic LiPo voltage detector 1S 8S digital and programmable
7. Toolkitrc Adapter cable SC100 USB-C to XT60
Power your model building charger with a USB-C power supply. Input voltage: USB-C 5.0-20 V, supports PD2.0, PD3.0, and QC2.0.
8. Voltcraft LiPo balancer
Easily charge four LiPo batteries with an XT60 connector system, having the same number of cells and the same capacity, in parallel using the parallel charging board. Charging your batteries simultaneously saves a significant amount of time. At the same time, the batteries can be balanced via an XH balancer connector system. The main circuit can handle up to 40 A.
9. Simprop dual-rate & servo reverse module uni
With the Dual-Rate-Reverse Module, the servo travel can be continuously adjusted from 0.5 to 125% using the rotary knob, allowing for reduction or even amplification. Additionally, the switch on the module allows you to determine the servo rotation direction (Reverse). These features make the module ideal for a second elevator servo, for increasing travel on landing gear servos, and for steering in RC cars. It is compatible with almost all common analog servos. Test it out; you will be impressed. Continuously adjustable servo travel from 0.5 to 125%. Servo reverse can be turned on and off. Hold function in case of signal loss or interference. Suitable for both analog and digital servos.
10. Reely Sound module Motor Truck 5 - 8.4
Electric vehicle with engine sound, not working? The engine sound simulator makes it possible. What the automotive industry has shown us is now also possible for RC trucks.
Product order
See all products