Best selling RC electronics accessories
This page always stays fresh and updates automatically.
1. SkyRC Gyroscope for RC Car Models Gyro GC301
Gyroscope for RC Car Models SkyRC Gyro GC301
The SkyRC GC301 Gyroscope is specifically designed for RC cars. This device utilizes a gyro sensor and a special algorithm to adjust the position of the wheels, enhancing stability and driving characteristics. The GC301 improves maneuverability and makes the model easier to control. It is also extremely lightweight and compact, making it suitable for models of any size without adding significant weight.
Key Features:
- Adjustable steering for improved control, enhancing cornering at higher speeds and stability during driving.
- Remote control function allows for performance adjustments via a 3-channel transmitter or a trimmer on the device.
Specifications:
- Manufacturer: SkyRC
- Model: SK-600142-01
- Operating Voltage: 4 - 8.4 V
- Current Consumption: 25 mA
- Operating Temperature Range: -10°C to +45°C
- Weight: 3.6 g.
2. Revell Paddle rod with linkages
RC electronics accessories
Quantity discount
EUR9,29 per piece for 2 units
Revell Paddle rod with linkages
3. Multiplex Lithium Battery Checker and Model Finder
Battery tester It can display the voltage of each cell of the lithium polymer battery and indicates the remaining capacity of the battery as a percentage value. The LEDs on the side of the battery tell you within seconds whether the battery is full, half-full or empty. Locating beeper / model finder The Lithium Battery Checker uses an integrated sensor to detect whether the model is moving or lying somewhere. Via the adjustable threshold, an acoustic signal can thus be emitted after 1 minute of standstill, so that you can find your model in tall grass or away from the airfield. Undervoltage warning The Lithium Battery Checker can remain in the model in flight, and gives an audible and visual warning when the set threshold for the cell voltage is reached (the standard is 3.50 Volts). This makes it easy to see whether the battery is about to run out when the model flies past. Info Display Various display indicators allow you to obtain a lot of information about the battery at a glance: Total voltage, remaining capacity, cell drift and cell condition. Suitable for all lithium batteries For left- and right-handers: In the settings menu the display can be rotated to adjust the usage. - Dimensions: 54 x 34 x 11 mm - Weight: 16 g.
4. Revell Main shaft with gear set
The main shaft with gear set from Revell is an essential accessory for RC models, specifically designed for the Heli Magic Glow (23934). This replacement part includes both the rotor shaft and the gears that are crucial for the smooth operation of the model. The use of high-quality materials ensures long-lasting durability and reliability, while the precise construction allows for easy installation. This set is ideal for hobbyists looking to optimize or repair their RC models. Please note the age restriction, as the product is not suitable for children under 14 years old. Safety instructions should be followed to avoid potential hazards from small parts that could be swallowed.
- Includes rotor shaft and gears for the Heli Magic Glow (23934)
- High-quality materials for durability and reliability
- Easy installation for quick repair or optimization.
5. Creativ Company Pipette set 15 pieces
Pipettes for precise dosing of paints and thinners. With scale. Made of plastic. Length: 15 cm. Capacity: 3 ml. Packaging unit: 15 pieces. Inspirations and ideas for creative individuals. Creativ Company is a Danish company that is now represented in nine other European countries. Its own innovative products from the world of crafting, decorating, and creating delight both creative professionals and beginners alike. Thanks to an international network of suppliers and business partners, Creativ Company meets the high demands of its customers while continuously evolving. The company's products are designed to inspire many hours of fun, play, and learning, making the world a little more creative.
RC electronics accessories
Quantity discount
EUR8,23 per piece for 2 units
Creativ Company Pipette set 15 pieces
6. Futaba S-BUS HUB 6 Port
S-BUS HUB 6 Port.
7. Pichler Clamps Ammeter AC/DC
High-quality clamp ammeter for measuring direct current AC and alternating current DC. Thus, this ammeter is also suitable for measuring brushless drives (BLDC) in model making. Functions - Voltage measurement = from 600mV to 600V (resolution 0.1mV) - Current measurement = up to 600A (resolution 0.1A) - Capacitance measurement = from 60nF ~ 6000nF - Temperature measurement = from -40°C to +1000°C - Frequency measurement = from 10Hz to 20Mhz - Diode test and continuity test Please refer to the manual for the full range of functions Features - Clamp ammeter AC / DC - LCD display - High resolution - Automatic detection of polarity - Clamp opening max. 28mm - Overload indicator - Data hold function - Measuring cycle 3x/s - Battery status - Auto power off Technical data Dimensions = 123 x 270 x 35mm Weight = 280g Temperature range = 0-40°C Batteries = Mignon AA x2 Scope of delivery - Clamp ammeter - Measuring tips - Temperature sensor - Carrying bag - German manual.
8. Swaytronic Power ParaBoard 6x EC5
Swaytronic Paraboard. Application: The simplest and safest solution for charging multiple batteries simultaneously. The Paraboards allow for charging up to 6 or 8 batteries with the same voltage through a single charging output. The configuration of the Paraboard ensures that the batteries are charged in a well-balanced manner. Batteries with different states of charge (SOC) can be connected. Customer benefit: By charging up to 6 or 8 batteries through one charging output, your charging effort is reduced, especially when dealing with multiple batteries. There is no need to unplug and replug when a battery is charged, and your batteries are charged cleanly and evenly.
9. Diverse Electronic uni switch
The electronic universal switch is a versatile accessory for remote control of various electrical circuits. It allows for the turning on and off of devices such as spotlights, water pumps, and other electrical consumers, making it a practical solution for model building projects and other applications. With a compact design and easy operation, this universal switch is ideal for anyone needing reliable control of their electrical components. The operation is done via a remote control, allowing for flexible handling. Please note that the universal switch is delivered without a servo connection cable.
- Output current of up to 8 Amperes for powerful applications
- Push-button function for easy operation
- Operating voltage of 4 to 6 Volts for versatile usage
- Relay switching contact for reliable performance.
10. BavarianDemon AXON, flybarless system
Specifically designed for all RC helicopters, the AXON combines all state-of-the-art features while ensuring ease of use—especially with the upcoming Android and iOS apps via Bluetooth. The most important aspect at the airfield is the intuitive and simple operation and adjustment of all parameters without the need for a PC, laptop, or external adjustment box. The AXON impresses with ultra-precise flight control, the latest 32-bit technology, up to 3 parameter banks, intelligent vibration control, and for those who don't want to compromise, now also includes an integrated speed controller (for both electric and combustion engines). Additionally, the AXON is compatible with all common analog and digital summation signal protocols, allowing all RC helicopter pilots to utilize this innovative technology housed in the new fire-red aluminum X-case. It feels simply amazing, and in no time, you will reach a new level of performance.
Feature Overview:
- Ultra-precise flight control
- Latest 32-bit technology
- Multiple horizon and rescue modes
- 3 parameter banks
- Internal speed controller (for electric and combustion engines)
- Intelligent vibration control
- iOS and Android app
- Multi-protocol input
- Future-proof with online updates
- Prepared with sensor bus
New Design:
- Fire-red sensor unit
- Extravagant X-design (case)
- Case made of anodized aluminum (CNC machined).
Product order
See all products