The Dynamic Basic cabinets are designed for user-friendly installation of active and passive network components, as well as for clean cabling. Each cabinet is made from up to 1.5 mm thick steel sheet, ensuring excellent stability through a special sheet metal bending technique that creates a robust steel construction. The color finish is achieved through powder coating in Grey (RAL 7035) and Black (RAL 9005). In special cases, disassembly of the cabinets can be performed to reach hard-to-access installation locations. The doors can be easily removed, and a door stop change can be made. Additionally, the roof is prepared for the installation of a fan module for active ventilation. The cabinets include 2 pairs (4 pieces) of mounted 483 mm (19”) profile rails inside. These are galvanized and marked with height units (countable in both directions). They can be adjusted in depth and are additionally connected with depth braces within the cabinet to allow for an intensive setup with 483 mm (19”) components. An important aspect of installation is cable management. Each cabinet is equipped with a punched cable entry with a cover plate in the base. The base of cabinets wider than 800 mm is further expanded with punched cable entries with plastic covers on the left and right. In the roof, there is one such entry for cabinets with a width of 600 mm and three entries for those wider than 800 mm. A comprehensive portfolio of accessories for cable management, shelves, etc., is available to meet many everyday practical requirements.