Introduction
The EDS-P206A-4PoE switches are intelligent, unmanaged 6-port Ethernet switches that support PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as Power Sourcing Equipment (PSE) and enable centralized power supply by providing up to 30 watts of power per port.

The switches can be used to power IEEE 802.3af/at-compliant Power Devices (PD), eliminating the need for additional cabling. They support IEEE 802.3/802.3u/802.3x with 10/100M, full/half duplex, MDI/MDI-X auto-sensing, and offer a cost-effective solution for your industrial Ethernet network.

EDS-P206A-4PoE-MM-ST
EDS-P206A Series
Unmanaged Ethernet switch with 4 PoE ports, 2 100BaseFX multimode ports with ST connectors, operating temperature of -10 to 60 °C

Ethernet Interface

• 100BaseFX Ports (Multi-Mode ST Connector): 2
• PoE Ports (10/100BaseT(X), RJ45 Connector): 4, automatic speed negotiation, full/half duplex mode, automatic MDI/MDI-X connection
• Standards:

IEEE 802.3 for 10BaseT
IEEE 802.3af/at for PoE/PoE+ output
IEEE 802.3x for flow control
IEEE 802.3u for 100BaseT(X)

• PoE Pinout: V+, V+, V-, V- for pins 1, 2, 3, 6 (Endspan, MDI, Mode A)

Switch Features
Packet Buffer Size: 768 kbits
MAC Table Size: 2 K
Processing Type: Store and Forward

Power Parameters

• Input Current: 5.55 A @ 24 VDC
• Connection: 1 removable 4-contact terminal block
• Operating Voltage: 12 to 57 VDC
• Input Voltage: 12/24/48 VDC, redundant dual inputs
• Power Consumption:

Max. 120 W for total PD consumption
Max. 30 W for each PoE port

• Power Consumption (max.): Max. 13.2 W at full load without PD consumption
• Reverse Polarity Protection: Supported
• Overload Protection: Supported

Physical Properties
Housing:...