EUR319,–
Ugreen NASync DXP2800
0 TB
Questions about Ugreen NASync DXP2800
What would you like to know?
0 questions and answers
Galaxus
2 weeks ago
Helpful answer
Yes, the device works under Linux. You can set up Linux as a virtual machine (VM) on the UGOS Pro operating system or install Proxmox VE (PVE, Linux-based) directly. It supports file shares such as SMB and NFS, which can be used by Linux clients. The official compatibility list refers mainly to hardware, not explicitly to client operating systems.
Automatically generated from the .
Galaxus
1 week ago
Helpful answer
This product is not ready to use for storage, as it is an empty enclosure with no hard drives included. You will need to purchase and add hard drives separately to its 2 SATA bays in order to use it.
Automatically generated from the .
Galaxus
1 month ago
Helpful answer
Yes, hard drives from the "Seagate IronWolf" series are a very good fit for this NAS model. They are specially developed for use in NAS systems and offer reliability and performance in multi-user environments. The NAS is compatible with hard drives from manufacturers such as Seagate, Western Digital and Toshiba.
Seagate IronWolf hard drives are a very good recommendation for beginners, as they are optimised for NAS environments. Alternatively, WD Red hard drives, which are also specially designed for NAS systems, are also recommended. Be careful not to use SMR hard drives and not to mix old and new hard drives in the RAID to avoid data loss.
Automatically generated from the .
Galaxus
1 month ago
The Seagate EXOS X24 24TB disc drive (ST24000NM000C) is a SATA 3 disc drive and is NAS compatible which supports 3.5-inch SATA discs up to 44 TB per disc. This NAS has two SATA hard drive bays and supports RAID 0, 1, and JBOD configurations, so it can easily accommodate the Seagate EXOS X24 24TB drive. The maximum capacity per disc is more than 24TB, so the disc is also compatible in terms of capacity.
Automatically generated from the .
Helpful answer
Well, depending on the hard drives. In operation 22-25 watts, standby 10 watts, start-up from standby briefly 38 watts measured at 230V
Helpful answer
Thank you for your feedback. Unfortunately, we cannot guarantee this. In the case of the Ugreen US3000 UPS, I have gladly forwarded the enquiry to our purchasing department. Unfortunately, we cannot guarantee success, but if successful, the product will soon be visible in our shop. If the result is negative, it will not.
Helpful answer
Probably yes. It is possible to switch on SMB1 in the control panel. I have not tested it.
The pre-installed UGOS is installed on a soldered 32GB eMMC chip. Both NVMe slots are free.
I disabled the eMMC device (and the watchdog!) in the BIOS, and then installed Rocky Linux 9 on the two NVMe SSDs in RAID1.
Helpful answer
The UGREEN NASync DXP2800 only supports SATA hard drives (3.5" or 2.5") and is not compatible with SAS hard drives. This has been confirmed by UGREEN as well as mentioned in user reports.
The device is supplied without hard discs. When you order the NAS, the appropriate hard discs are suggested. You can then choose which storage size you want. Installing the discs is very easy. In my opinion, the software of the NAS is also quite simple and also suitable for a layman. If something was not clear to me, AI was able to help me well. Greetings RK
Helpful answer
Hello !
There are Photo, Video and Music applications that you can also install on your Smart Phone
Helpful answer
Hello ! I have installed the 32GB Crucial on the DXP2800 without any problems. But I have no idea if it will work on your Zotac, normally I would say yes, you have to try:
Crucial Technology DDR5-5600 (1 x 32GB, 5600 MHz, DDR5 RAM, SO-DIMM)
Hi yes there is a whole APP store for the NAS. Also one for photos.
I can't answer your question about the iPhone.
Galaxus
5 months ago
Helpful answer
The NASync DXP2800 primarily uses SATA drives for main storage, with M.2 NVMe SSDs typically used as read-write caches to enhance performance. While it is technically possible to use M.2 NVMe SSDs, they are not intended for main storage in this setup. The device is designed to support SATA drives in its two bays for primary data storage.
Automatically generated from the .I have it running with Unraid and 48GB without any problems
Galaxus
7 months ago
Yes, it is possible to encrypt the hard drives. The NAS supports professional encryption, including robust standards such as AES-256, to fully protect data transfer and stored data. Encryption can take place at different levels, such as full hard drive encryption, which offers maximum security.
Automatically generated from the .
This NAS has no built-in hard drives. The two trays are empty. The product designation "Ugreen NASync DXP2800, 0 TB" indicates this ("0 TB").
Former employee
8 months ago
We are currently looking for a new supplier, so it is not yet possible to predict whether / when the item will be available again.
Galaxus
9 months ago
Yes, you can install Nextcloud via Docker.
To install Nextcloud on a NAS, you need Docker, which you can set up on your NAS. Here are the basic steps:
- Install Docker: Make sure that Docker is installed on your NAS. This can usually be done via the package centre of your NAS.
- Use Docker-Compose: Create a `docker-compose.yml` file in which you define the configuration for Nextcloud and the required database (e.g. MariaDB).
- Set up the database: In the `docker-compose.yml` file, you must specify environment variables for the database such as `MYSQL_ROOT_PASSWORD` and `MYSQL_DATABASE`.
- Start container: Use the command `docker-compose up -d` to start the containers in the background.
- Set up Nextcloud: Once started, you can access the Nextcloud web interface using the IP address of your NAS and the configured port to complete the installation.
These steps are general and may vary slightly depending on your NAS model and operating system. There are many detailed guides online that can help you understand the process specific to your NAS model.
Automatically generated from the .21 of 21 questions