Best Phobya products in the Water cooling monitoring category
On this page you'll find a ranking of the best Phobya products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Phobya Flow sensor cable 3 pole 80cm black sleeved
Three-wire cable for connecting the flow sensor to fan controllers or readout devices. Length approx. 80 cm, plugs on both sides (special plug on the sensor). Ifnecessary, the cable can be extended with standard 3-pin fan extension cables.
2. Phobya Temperature sensor female/male thread G1/4 black matt
The new temperature sensor from Phobya with G1/4 internal and external threads can be installed perfectly in any cooling circuit with the appropriate thread size.Due to its simple design it adapts optically to every system. Since the sensor is only 11.6mm high (without thread) it takes up as little space as no other sensor before. The connection is made via the two-pole standard plug.
HighFlow, no rejuvenation within the temperature sensor. See mounting example
3. Phobya Thermosensor single 50cm black sleeved
SMD temperature sensor with cable and 2pin connector. This model is similar to the sensors used in the thermometers available in the shop, as well as the DigitalDoctor. This sensor is of course universally applicable in other devices as well. Cable length approx. 50cm.
compatibility:
It is a 10kOhm temperature sensor which is compatible with the following devices, among others:
aquaero 3.07, aquaero 4.00, aquaero 5
aquastream XT Ultra
aquaduct variants with external sensor input (360 XT, 720 XT)
Alphacool Heatmaster
Innovatek Fan-O-Matic
Lian Li multipanel
Scythe Kaze
T-Balancer
Sensor inputs of many motherboards
4. Phobya WaKü filter Silver
The new Magicool filter made of brass is ideal for water cooling systems with microstructured coolers. The filter prevents a microstructured cooler from clogging,as such coolers can hardly be cleaned manually due to their small structures. The filter, on the other hand, offers a great advantage: it can be dismantled and the sieve can be cleaned with a brush, for example. If required, the screen can also be reordered individually at a very reasonable price. (see art. 94060) The filter is constructed in such a way that the resistance of the strainer is practically non-existent. On the contrary: the flow rate of the strainer is designed approx. 50% larger than a hose with an inner diameter of 8mm and approx. 30% larger than a hose with an inner diameter of 10mm. This filter is therefore ideally suited for high-flow systems. Only when the filter has become clogged by more than 30% or 50% does a reduction in flow rate occur. This effect is particularly evident in the fact that the enlargement of the interior compared to the inlet has a purely positive physical effect. In addition, inlet is constructed that kind, air there is not pressed out by water. Only when the flow rate is reduced is the air also forced out, which is then a clear sign for cleaning.
Filter: Microfilter made of stainless steel fibres
Flow reduction only from very heavy contamination (30% or 50%), micro filter made of stainless steel fibres, G1/4 inch brass filter with 20 x 25mm (l x d)
Filter unit consisting of 2 brass parts, O-ring and filter screen. Already completely pre-assembled
5. Phobya Temperature sensor female/male thread G1/4
The new temperature sensor from Phobya with G1/4 female and male threads can be perfectly installed in any cooling circuit with the appropriate thread size. Dueto its simple design it adapts optically to every system. Since the sensor is only 11.6mm high (without thread) it takes up less space than any other sensor before. The connection is made via the two-pole standard plug.
HighFlow, no tapering within the temperature sensor.
compatibility:
It is a 10kOhm temperature sensor which is compatible with the following devices, among others:
aquaero 3.07, aquaero 4.00
aquastream XT Ultra
aquaduct variants with external sensor input (360 XT, 720 XT)
Alphacool Heatmaster
Innovatek Fan-O-Matic
Lian Li multipanel
Scythe Kaze
T-Balancer
Sensor inputs of many motherboards
6. Phobya 4Pin PWM to 3Pin Transformer Single
Controlling 3-pin fans via a PWM signal was an insoluble problem until now. Phobya has taken on this problem and presents with the 4-pin PWM to 3-pin converter anelegant and easy to use solution. With the 4-Pin PWM to 3-Pin transformer all 3-Pin fans can now be controlled via a normal PWM signal. To do this, connect the converter to your mainboard or your PWM fan controller while you connect the fan to the converter. Now your 3-pin fan can be controlled like any other PWM fan. The converter recognises the PWM signal and controls the 3-pin fan with an appropriate voltage. This way you can control your fans easily and simply. The converter is able to supply an output voltage of 1A, which corresponds to 12W. This means that you can use a Y-splitter to control several fans simultaneously via the converter. Technical Details: Dimensions (LxWxH): 50 x 39 x 18mm Connector: 1x 4 Pin / 1x 3 Pin Power connector: 4 Pin Connector Mounting: Double sided adhesive tape for mounting on/in the case 4 Pin PWM to 4 Pin PWM Cable: black sleeved 50cm Included in delivery: Phobya 4Pin PWM to 3Pin Transformer Single .
7. Phobya Thermosensor single 80cm black sleeved
SMD temperature sensor with cable and 2pin connector. This model is similar to the sensors used in the thermometers available in the shop, as well as the DigitalDoctor. This sensor is of course universally applicable in other devices as well. Cable length approx. 80cm.
Sleeving:
This cable is not only functional, but also visually very attractive. The netting that wraps around the actual cables is very dense and offers exactly the effect that the professional sleevers want: Complete reconstruction of the cables to emphasize the uniqueness of his system even better! Special attention was paid to the combination of the cable sheathing (the sleeve), the plug and the heat-shrinkable tubing to create a uniform appearance.
compatibility:
It is a 10kOhm temperature sensor which is compatible with the following devices, among others:
aquaero 3.07, aquaero 4.00, aquaero 5
aquastream XT Ultra
aquaduct variants with external sensor input (360 XT, 720 XT)
Alphacool Heatmaster
Innovatek Fan-O-Matic
Lian Li multipanel
Scythe Kaze
T-Balancer
Sensor inputs of many motherboards
8. Phobya Thermosensor In-Line 2x G1/4 female thread black matt
Highly accurate in-line thermosensor for practically all 1/4"" devices Connections The sensor can be integrated at any point in the cooling circuit. In the areaof the sensor the residual wall thickness is set to <1mm
9. Phobya Thermosensor single 90cm
SMD temperature sensor with cable and 2pin connector.
This model is similar to the sensors used in the thermometers available in the shop, as well as the DigitalDoctor. This sensor is of course universally applicable in other devices as well. Cable length approx. 90cm.
compatibility:
It is a 10kOhm temperature sensor which is compatible with the following devices, among others:
aquaero 3.07, aquaero 4.00
aquastream XT Ultra
aquaduct variants with external sensor input (360 XT, 720 XT)
Alphacool Heatmaster
Innovatek Fan-O-Matic
Lian Li multipanel
Scythe Kaze
T-Balancer
Sensor inputs of many motherboards
10. Phobya Thermosensor single 50cm
SMD temperature sensor with cable and 2pin connector. This model is similar to the sensors used in the thermometers available in the shop, as well as the DigitalDoctor. This sensor is of course universally applicable in other devices as well. Cable length approx. 50cm.
