Best selling Electrical enclosures from Hager
This page always stays fresh and updates automatically.
1. Hager Small distributor
Small distribution board Vector APV, IP65, 36PLE, with cable management channel. Installation small distribution board AP made of plastic, in accordance with DIN EN 60670-24 and DIN 43871. For the installation of devices up to 63 A according to standard DIN 43880 with installation depths of 70 mm or 85 mm, rated voltage AC 400 V/50 Hz. Consists of a plastic base with a hat profile rail made of galvanized steel sheet, pre-formed for metric cable entry bushes (top, bottom), and side pre-forming for connection bushes to connect two or more distributors side by side. Built-in PE/N terminals with quick-connect terminal, top part with 46 mm device slot. Clear door flush with the front, can be hinged on the right or left, sealable, lockable, and the distributor can be flanged.
2. Hager Flush-mounted small distribution board
Installation small distributor flush-mounted made of plastic, according to DIN VDE 60670-24 and DIN 43871, suitable for use in residential buildings according to DIN 18015 and for the installation of protective insulated VDI components. Protection class IP30, protection class II insulated.Consisting of: Plastic wall box with standard cable catch, break-out cable entry slider with snap-on fastening, integrated spirit level and galvanized sheet steel fastening lugs. Rotatable frame with ventilation door made of sheet steel, powder-coated and baked, with 15 mm plaster compensation. Ventilation door, flush with front, with internal hand-operated hinges. Door lock with flush handle recess and automatic retracting handle, door hinged on right or left without panel frame removal.Upper connection compartment: Patch panel and DIN top-hat rail insulated snapped on to accommodate different communication modules, for the required functional equipotential bonding according to DIN EN 50310 (VDE 0800-2-310) are.
3. Hager VA36CN Distribution cabinet surface-mounted
Volta surface-mounted distribution board IP30 without door, 36 module units. Surface-mounted installation small distribution board made of plastic, according to DIN VDE 06031 and DIN 43871. Designed for the installation of devices up to 63 with a maximum installation depth of 70 mm according to standard DIN 43880. Consists of a plastic base plate with standard cable catch, device carrier made of galvanized steel sheet, DIN rail for the installation of modular devices according to DIN 43880. Device cover made of plastic with a 46 mm device slot, can be sealed as standard. Door accessories made of powder-coated and baked steel sheet. Door flush with the front, with internal, manually operable hinges. Door lock with flush handle recess and self-retracting handle. Door hinge can be on the right or left. Finger-safe PEN terminal with plug-in technology in a user-friendly snap-in design, N-terminal for RCD circuits as standard. VA36CN.
4. Hager Volta.Hybrid cavity wall 24PLE
Small installation distributor for installation in hollow walls made of plastic from the company Hager. It consists of a plastic wall box with a standard cable entry and a removable cable connection slider with a snap closure, as well as an integrated spirit level. The hollow wall mounting features a quick-release lever and can be mounted on the side or top/bottom. The door can be hinged on the right or left without the need to dismantle the frame. The ventilation door has a non-transparent plastic panel that allows for better propagation of the Wi-Fi signal compared to a metal door. It includes a 2-row device rack made of galvanized steel sheet. The finger-friendly PE/N connection features plug-in technology in an installation-friendly snap design. A partition wall is installed for a safe separation between the multimedia area and the power distribution, which also provides space for up to two sockets. Device holders for tool-free mounting of devices directly onto the mounting plate by hooking or screwing are also included. Cable management clips are also available.
5. Hager VH48WWV
The Hager VH48WWV is a versatile small distribution board specifically designed for use in residential buildings. This multimedia distributor is ideal for the installation of protective insulated VDI components and meets the requirements of DIN VDE 61439-3 as well as DIN 18015. The distributor is made from robust plastic and offers an IP30 protection rating along with protection class II. The thoughtful design includes a slotted plastic door that not only provides an appealing appearance but also enhances signal transmission for Wi-Fi. With an integrated wall box and a continuously perforated mounting plate made of galvanized steel, the VH48WWV is optimally suited for mounting active and passive communication technology. User-friendly features, such as the rotatable protective contact sockets and flexible door mounting, make this small distribution board a practical solution for modern living spaces.
- Multimedia distributor for Homeway systems
- Integrated spirit level for easy installation
- Rotatable frame with ventilation door for improved Wi-Fi signal
- Rotatable protective contact sockets with protective contact cover
- Continuously perforated mounting plate for flexible mounting options.
6. Hager VU48BV1
Complete flush-mounted small distribution board made of plastic, in accordance with DIN VDE 60670-24 and DIN 43871, suitable for use in residential buildings in accordance with DIN 18015. For installation of devices up to 63 A with 70 mm installation depth in accordance with dimension standard DIN 43880, rated voltage 400V/50Hz. Protection class IP30, protection class II insulated.
Consisting of: Plastic wall box with standard cable support and break-out cable entry sliders with snap-on fastening, integrated spirit level and galvanised sheet steel fastening lugs. Device support made of galvanised sheet steel, top-hat rails can be installed individually insulated. Plastic appliance cover with 46 mm appliance slot, quick-release fastening with 90° rotation, sealable as standard. Rotatable cover frame with door made of sheet steel, powder-coated and baked, with 15 mm plaster levelling. Door, flush with front with internal manually operated hinges.
Door lock with flush handle recess and automatically retracting handle, door hinges right or left without cover frame installation. Standard wiring diagram mounting in the door and integrated side cable duct with cable retaining clips. Finger-safe PE/N terminal with plug-in technology in easy-to-install snap-in design and N terminal for RCD circuits as standard.
Equipped and wired with:
- 2 x RCDs, 4-pole, 40A
- 9 x LS switch, 1-pole, 16A
- 1 x LS switch, 3-pole, 20A
- 1 x type 2 surge arrester
- 1 main line branch terminal
- including main power wiring.
7. Hager Small distributor volta APV
Surface-mounted small distribution board made of plastic according to DIN VDE 0603/1 and DIN 43871, which serves as a branching point for the meter locations (APZ) outside the meter housing in accordance with application rule AR4101.
This surface-mounted distribution board APZ consists of a plastic base plate with a standard cable holder, a DIN rail made of galvanized sheet steel, two perforated mounting plates, an RJ45 socket, and three conduit entries for electrical installation pipes (pipe diameter 25 mm). It features a plastic device cover with a 46 mm device space, which is lockable by default, as well as three lockable cover strips. The door is made of sheet steel, powder-coated and baked, and is flush with the front, equipped with internal manually operated hinges. The door lock includes a flush handle recess and a self-retracting handle.
The door hinges can be positioned on the right or left. Please note: The surface-mounted distribution board APZ must be installed near the meter housing. Included conduit entries for empty pipes (not included) are required from the meter location to the APZ as well as from the APZ to the A.
8. Hager VE318SN
The Hager VE318SN is a high-quality small distribution board designed for use in various electrical installations. It meets the requirements of the standards DIN EN 60670-24 and DIN 43871, providing a reliable solution for housing devices up to 63 A. The distribution board is made from UV-resistant polycarbonate and offers an IP65 protection rating, making it ideal for use in demanding environments. With a clear door that can be hinged on either the right or left, the VE318SN allows for easy accessibility and is sealable and lockable. The pre-formed entries for cable inlets and connection fittings offer additional flexibility for the installation and expansion of distribution boards. The small distribution board is suitable for surface mounting and provides a robust and durable solution for electrical distributions.
- UV-resistant polycarbonate material
- IP65 protection rating for high durability
- Pre-formed entries for easy cable inlets
- Sealable and lockable clear door
- Suitable for devices up to 63 A according to DIN 43 880.
9. Hager TEHA stainless steel cassette
Tehalit Outlet Box Construction Group 5 EKR060LE15
Manufacturer: Tehalit
Description: Outlet box Construction Group 5 h3+ P630 4P 400A
Type: EKR060LE15
Nominal size: 214 mm
Cassette height: 95 mm
Min. installation depth: 95 mm
Leveling height: 95 - 282 mm
Depth of floor covering recess: 15 mm
Floor maintenance: dry
Design: round
Material: stainless steel
Number of cable outlets: 1
Cable outlet design: swiveling
Cable outlet color: gray
Device carrier for accommodating device boxes: yes
Installation diameter: 215 mm
Number of installable devices: 6
Number of device boxes: 2
Tehalit Outlet Box Construction Group 5 EKR060LE15: further details
Leveling stainless steel cassette R06 with cable outlet for 6x45 modules, covering T=15mm. Leveling cassette with cable outlet, round, consisting of cassette frame, cable outlet cassette cover, seal, cable retention clip. Usable for all types of floor constructions in dry indoor areas with dry-maintained floors. The seal is replaceable to ensure the protection class permanently. Designed for the installation of step-down device boxes for up to 6 devices 45 x 45 mm. Tested according to DIN EN 50085-1 and DIN EN 50085-2-2.
10. Hager VE318DN - 1 piece(s) - 418 mm - 151 mm - 602 mm
The Hager VE318DN is a high-quality small distribution board designed for use in various electrical installations. With an IP65 protection rating, it offers effective protection against dust and water, making it ideal for use in demanding environments. The distributor is made of robust plastic and complies with the standards DIN EN 60670-24 and DIN 43871. It allows for the installation of devices up to 63 A and is equipped with a hat profile rail made of galvanized steel sheet. The pre-formed entries for cable inlets and connection sleeves facilitate the installation and connection of multiple distributors. The clear door is both sealable and lockable, providing additional security. The Hager VE318DN is therefore a reliable solution for the distribution of electrical energy in residential and commercial buildings.
- IP65 protection rating for optimal dust and water protection
- Suitable for the installation of devices up to 63 A
- Hat profile rail made of galvanized steel sheet for stability
- Pre-formed entries for easy cable inlets and connections
- Sealable and lockable clear door for additional security.
Product order
See all products