Top rated Electrical enclosures
Here’s a ranking of the top rated Electrical enclosures. To give you a quick overview, we’ve added the most important information about each product. This page always stays fresh and updates automatically.
1. Hager Electrical distribution board
Mini distributor, gamma, 2 module, IP30
Mini distributor as smallest distributor made of plastic for installation of (No suggestions) according to dimensional standard DIN 43
880 as contact protection cover according to BGV A2 for devices up to 63 A, 400 V /50 Hz, protection class IP30. For
Surface mounting with 46 mm device slot, sealable as standard.
2. OBO Bettermann Small distribution board
The OBO small distribution board series ensures safe power distribution both indoors and outdoors. The surface-mounted small distribution boards meet all requirements according to IEC 439-3 and are available in four different sizes with three to twelve division units. There are three equipment variants: with screw terminals, with plug terminals, and without terminals. All sizes and equipment variants are available in two materials. All small distribution boards come with a pre-mounted 35 mm hat profile mounting rail. The small distribution boards with terminal strips also include an accessory kit, which contains, among other things, a sheet of stickers. The self-adhesive pictograms eliminate the often tedious labeling of individual division units. If labeling is necessary, corresponding stickers are also available on the sticker sheet. The high protection class (IP66) and robust construction (IK07 at -25 °C) ensure safety even in challenging environmental conditions.
3. Boxexpert Fleet control cabinet
The BXPPABSG350500190-F01 Boxexpert from the Fleet series is a wall-mounted enclosure made of ABS plastic with 2-point locking, which is perfect for both indoor and outdoor use. It is easy to handle and very quick to install. The Fleet series is an alternative to all sheet steel wall-mounted enclosures. Sheet steel enclosures are often expensive to purchase and are very heavy. This often leads to additional costs, both in terms of logistics and handling. In many cases, sheet steel enclosures can be dispensed with for EMC-critical applications. Enclosures from Boxexpert's Fleet series offer an alternative made of plastic. The wall-mounted enclosure housing is made of very lightweight acrylonitrile-butadiene-styrene copolymer (ABS), which results in a weight saving of around 50 % for the same enclosure size. Despite the lower weight, the Fleet enclosure series is a robust alternative and has an impact resistance of IK08. ABS plastic is highly resistant to alkalis, oils and salts. In contrast to metal enclosures, the Fleet series has the advantage of being resistant to corrosive loads without any further coating of the enclosure surface. Outdoor use in particular requires the electronic components to be effectively sealed against external influences. The plastic enclosures in the Fleet series have a foamed-in polyurethane (PU) seal. The PUR seal is low-wear and robust against weathering and ageing. The polyurethane is elastic and resistant even when the enclosure door is frequently operated. In addition to the properties of the ABS plastic, the enclosure seal also ensures an enclosure protection rating of IP65. The enclosure is therefore suitable for both indoor and outdoor use.
4. Boxexpert Fleet
The BXPPABST250350150-F01 BOXEXPERT of the Fleet series is a wall cabinet housing made of ABS plastic with 2-point closure and transparent viewing door, which is perfectly suitable for both indoor and outdoor use. It is easy to handle and very quick to install. Fleet series is a cost effective alternative to all steel sheet wall cabinets. PRODUCT DESCRIPTION Sheet steel control cabinets are often expensive to purchase and have a high weight. Both from the logistical effort and handling, this often leads to additional costs. In EMC-critical applications, sheet steel cabinets are usually indispensable and can be dispensed with in many cases. Switch cabinets of the Fleet series from BOXEXPERT offer a cost-effective alternative made of plastic. The wall-mounted enclosure is made of very lightweight acrylonitrile-butadiene-styrene copolymer (ABS for short), which results in a weight saving of about 50% for the same enclosure size. Despite the lower mass, the Fleet enclosure series proves to be a robust alternative and has an impact resistance of IK08. ABS plastic has a high resistance to alkali, oils and salts. In contrast to metal enclosures, the Fleet series has the advantage of being resistant to corrosive loads without the need for further coating of the enclosure surface. PUR SEALING Especially the use in outdoor applications requires an effective sealing of the electronic components against external influences. The plastic housings of the Fleet series have a foamed-in seal made of polyurethane (PU for short). The PU seal is low-wear and robust against weathering and aging. The polyurethane also proves resilient and resistant to frequent operation of the control cabinet door. In addition to the properties of the ABS plastic, the enclosure seal also ensures an enclosure protection rating of IP65.
5. Boxexpert Fleet control cabinet plastic transp
The BXPPABST400600200-F01 BOXEXPERT from the Fleet series is a wall-mounted enclosure made of ABS plastic with a 2-point locking system and a transparent viewing door, making it perfectly suitable for both indoor and outdoor use. It is easy to handle and very quick to install. The Fleet series is a cost-effective alternative to all steel sheet wall cabinets.
Steel sheet cabinets are often expensive to purchase and have a high weight. This frequently leads to additional logistical efforts and handling challenges. In many cases, steel cabinets can be avoided in EMC-critical applications. The Fleet series cabinets from BOXEXPERT provide a cost-effective plastic alternative.
The wall-mounted enclosure is made from very lightweight acrylonitrile-butadiene-styrene copolymer (ABS), resulting in a weight reduction of about 50% for the same enclosure size. Despite the lower mass, the Fleet series enclosure proves to be a robust alternative with an impact resistance of IK08. ABS plastic exhibits high resistance to alkalis, oils, and salts. Unlike metal cabinets, the Fleet series has the advantage of being resistant to corrosive stresses without requiring any additional coating on the enclosure surface.
Particularly for outdoor use, effective sealing of the electronic components against external influences is essential. The plastic enclosures of the Fleet series feature a foamed polyurethane (PU) gasket. The PUR gasket is low-wear and robust against weather conditions and aging. Polyurethane remains elastic and resilient even with frequent operation of the cabinet door. In addition to the properties of ABS plastic, the enclosure gasket ensures an enclosure protection rating of IP65.
6. Boxexpert Fleet control cabinet plastic transp
The BXPPABST300400170-F01 Boxexpert from the Fleet series is a wall-mounted cabinet housing made of ABS plastic with a 2-point locking system and a transparent viewing door, making it perfectly suitable for both indoor and outdoor use. It is easy to handle and very quick to install. The Fleet series is a cost-effective alternative to all steel sheet cabinets. Steel cabinets are often expensive to purchase and have a high weight, which can lead to increased logistical effort and handling challenges. In many cases, steel cabinets can be avoided in EMC-sensitive applications. The Fleet series cabinets from Boxexpert offer a budget-friendly alternative made of plastic. The wall cabinet housing is made from very lightweight acrylonitrile-butadiene-styrene copolymer (ABS), resulting in a weight reduction of about 50% for the same housing size. Despite the lower mass, the Fleet series housing proves to be a robust alternative with an impact resistance of IK08. ABS plastic exhibits high resistance to alkalis, oils, and salts. Unlike metal cabinets, the Fleet series has the advantage of being resistant to corrosive stresses without the need for additional surface coatings. The use in outdoor environments particularly requires effective sealing of electronic components against external influences. The plastic housings of the Fleet series feature a foamed polyurethane (PU) seal. The PUR seal is low-wear and robust against weather conditions and aging. Polyurethane remains elastic and resilient even with frequent use of the cabinet door. In addition to the properties of ABS plastic, the housing seal also ensures an ingress protection rating of IP65.
7. Boxexpert Fleet control cabinet plastic grey
It is easy to handle and very quick to install. The Fleet series is a cost-effective alternative to all steel sheet wall cabinets.
Steel sheet cabinets are often expensive to acquire and have a high weight. This frequently leads to additional effort in both logistics and handling. While often essential for EMC-critical applications, steel sheet cabinets can often be avoided. The Fleet series cabinets from BOXEXPERT offer a cost-effective alternative made of plastic.
The wall cabinet housing is made from very lightweight acrylonitrile-butadiene-styrene copolymer (ABS), which results in a weight reduction of about 50% for the same housing size. Despite the lower mass, the Fleet housing series proves to be a robust alternative with an impact resistance of IK08. ABS plastic exhibits high resistance to alkalis, oils, and salts. Unlike metal cabinets, the Fleet series has the advantage of being resistant to corrosive loads without the need for additional coating of the housing surface.
Particularly for outdoor use, effective sealing of the electronic components against external influences is required. The plastic housings of the Fleet series feature a foamed polyurethane (PU) seal. The PUR seal is low-wear and robust against weather and aging effects. Polyurethane also remains elastic and resilient even with frequent operation of the cabinet door.
In addition to the properties of ABS plastic, the housing seal ensures an ingress protection rating of IP65. This makes the housing suitable for both indoor and outdoor use.
The cabinets in the BOXEXPERT Fleet series have a swing door, available in either gray or transparent.
8. Boxexpert Fleet control cabinet grey plastic
It is easy to handle and very quick to install. The Fleet series is a cost-effective alternative to all metal sheet cabinets. Metal cabinets are often expensive to purchase and have a high weight. This frequently leads to additional effort in both logistics and handling. In many cases, metal cabinets can be avoided in EMC-critical applications. The Fleet series cabinets from Boxexpert offer a cost-effective alternative made of plastic. The wall cabinet housing is made of very lightweight acrylonitrile-butadiene-styrene copolymer (ABS), resulting in a weight reduction of about 50% for the same housing size. Despite the lower mass, the Fleet housing series proves to be a robust alternative with an impact resistance of IK08. ABS plastic exhibits high resistance to alkalis, oils, and salts. Unlike metal cabinets, the Fleet series has the advantage of being resistant to corrosive stresses without requiring additional coating of the housing surface. The use in outdoor areas particularly necessitates effective sealing of the electronic components against external influences. The plastic housings of the Fleet series feature a foamed seal made of polyurethane (PU). The PUR seal is low-wear and robust against weathering and aging. Polyurethane also remains elastic and resilient even with frequent operation of the cabinet door. In addition to the properties of ABS plastic, the housing seal ensures an enclosure protection rating of IP65. This makes the housing suitable for both indoor and outdoor use. The Boxexpert Fleet series cabinets have a swing door, available in either gray or transparent.
9. Boxexpert Control cabinet
The BXPPABSG300400220-F01 BOXEXPERT from the Fleet series is a wall-mounted cabinet housing made of ABS plastic with a 2-point locking mechanism, perfectly suited for both indoor and outdoor use. It is easy to handle and very quick to install. The Fleet series is a cost-effective alternative to all steel sheet cabinets.
Steel cabinets are often expensive to purchase and have a high weight. Both the logistical effort and handling often lead to additional work. In many cases, steel cabinets can be avoided in EMC-critical applications. The Fleet series cabinets from BOXEXPERT offer a cost-effective plastic alternative. The wall cabinet housing is made of very lightweight acrylonitrile-butadiene-styrene copolymer (ABS), resulting in a weight reduction of about 50% for the same housing size. Despite the lower mass, the Fleet housing series proves to be a robust alternative with an impact resistance of IK08. ABS plastic has a high resistance to alkalis, oils, and salts. Unlike metal cabinets, the Fleet series has the advantage of being resistant to corrosive stresses without requiring additional coating of the housing surface.
Outdoor use requires effective sealing of the electronic components against external influences. The plastic housings of the Fleet series feature a foamed polyurethane (PU) seal. The PUR seal is low-wear and robust against weather and aging effects. The polyurethane remains elastic and resilient even with frequent operation of the cabinet door. In addition to the properties of ABS plastic, the housing seal also ensures a protection rating of IP65. This makes the housing suitable for both indoor and outdoor use.
10. Rittal Compact control cabinet AX 1-door, 500x700x250 1057.000
System perfection. The new compact housing AX (steel sheet) offers maximum data quality and consistency in technology, as well as flexibility and safety during assembly and internal installation.
Product order
See all products