I would like to operate the water pump directly with the power take-off shaft of my Fendt 1050: https://www.digitec.ch/de/s1/product/bosch-rexroth-hydraulik-zahnradpumpe-wasserkuehlung-pumpe-10387214?tagIds=76-526-695&supplier=3013528 What is your opinion, is it possible from the volume in the office? Thank you for your constructive opinion.
2
And which is better, D5 or DDC
3
https://www.phanteksusa.com/products... I would like to buy this Phanteks reservoir, I read that it also fits with D5 stand-alone pumps, but unfortunately I don't understand much about it and can't find anything on the internet. Can I now install a D5 pump in it and if so, which one?
0
It is such a pity that Digitec makes surcharges in the high 3-digit or even 4-digit percentage range on products that can be ordered 1:1 from "Chinese suppliers". If the prices were simply higher to secure the profit, 30-50% surcharge on the Chinese price, then I would have been happy to order the parts directly from Digitec instead of ordering them in China, but if I have to pay 100% surcharge for exactly the same expansion tank and even 44 instead of 3 CHF for a small water thermometer, then I see no reason to support the Swiss economy. Dear Digitec. Adjust your prices for China imports or if that doesn't work, look for better suppliers. If all this doesn't work, hope for many customers who don't know how to compare prices online and hope that nobody knows "Chinese supplier". So far I have ordered almost everything I wanted in terms of technology from you. Except for what you simply don't have. But now with such water cooling parts I have to bend my head. Attention: fantasy figures based on the real price ratio. Custom water-cooling set from a Chinese supplier, I put everything together myself and put it in the shopping basket. Total price approx. 300 Stutz. Same thing here at Digitec with comparable and partly even identical goods, 1000 Stutz...
9
Something is unclear to me. I would like to have my mainboard, CPU and GPU with a custom water cooling system. Is one water pump enough? And if so, how do I connect all the circuits? Are there any special adapters or anything else for this? Is it possible at all?
5
I have a question: How does it work with water cooling? Does the water at the pump first go into the radiator or first to the GPU/CPU etc...? Or can you choose freely?
5
Hello all I would like to build my first PC with water cooling myself. I have already assembled various PCs myself - but it would be my first with water cooling. Therefore my question: Does this set-up fit and have I thought of everything? https://www.digitec.ch/de... Thanks for your help! LG Nico
5
Hey Digitec! Are there any plans on your part to include the new XRES RGB reservoirs and RGB pump-reservoir combo from EKWB in the range?
1
Hello people I would like to treat myself to a custom wakü for my pc. I would like to install 2 360 radiators to be able to cool SLI later. Processor is a ryzen 7 1700 and Graka is a 1080ti. Now the question. Which pump would be good for my system? And by the way, is a 1000 watt power supply enough? Greetings and thanks for your help!
2
Hello Digitec, can you include the latest Aqua Computer Aquastream Ultimate in your shop?
1
Good morning everyone. I've decided to rebuild my GTX1080 FE. It should be a water cooling ONLY for the GPU, because the CPU is already attached to a "ready cooling" from Corsair. (https://www.digitec.ch/de/s1/product/corsair-hydro-h115i-cpu-kuehler-5700769) My problem is that I haven't put together a water cooling system yet and I need to know what I need. The following should be used as a cooling block for the GPU: http://www.phanteks.com/PH-GB1080.... It's the only one that looks halfway decent... and I'm a fan of LEDs, I even have the stupid 70.- mouse pad from Razer with LED strips. The radiator should be mounted on the bottom or front side, there is space for a 280 or 240mm radiator. (Links to the case at the end of the post) I just picked this one since my 2 front fans are 140mm: EKWB EK-CoolStream CE 280 (Black) I'm completely lost when it comes to the hoses, pumps and fluid to use, unfortunately I have no idea about that. Many pumps are quite large and probably meant for entire systems. However, I only want to have the GPU on it. I would also like some opinions on the radiator, of course. Whether front or bottom, what size and which fans to use on them, etc. I hope you can help me! Housing: [http://www.wsgf.org/f... Corsair Obsidian 750D Airflow Edition (Big Tower, Black)
18
Hey guys!! Here's the thing... my problem is that I don't know which components work together (are compatible). I already have that much on my list: Graphics card(I do NOT want water cooling): Gigabyte GTX 1070 Founders Edition (8GB, High End). Processor (I want to water-cool it): Intel Core i7 6700 (LGA 1151, 3.40GHz) Memory: (is 16GB enough or would you prefer 32?) HyperX Fury (2x, 8GB, DDR4-2133, DIMM 288) Case: (is it big enough?) be quiet! Silent Base 800 Window (Midi Tower) Pump: (enough power?) Alphacool VPP655 PWM Hose: (should be the right size) Alphacool hose 13/10mm UV blue (3m, PVC, transparent) Ice cream cup: (Is it compatible?) Alphacool Ice cream cup 250mm -I know that I am still missing the mainboard and other things, but I want to have all the things for the water cooling system first - what am I still missing? I know that I still need something to attach the hoses to the respective things (pump, processor) do you have a link or a name? - Are the things I already have on my list all compatible with each other and is the case big enough? THANK YOU FOR TAKING THE TIME! P.S I look forward to your answers
20
With the "EK-XRES 100 SPC-60 MX PWM", EKWB actually has a very good / inexpensive AGB/pump combination in its range. Unfortunately, this is not (yet) available at Digitec (or any other retailer in Switzerland). Would it be possible for you to initiate the inclusion of it in the range? Otherwise, I'll have to order it directly from the EKWB homepage and then deal with customs. (By the way, this pump is also part of the "EKWB Wakü-Set EK-KIT S240" kit, which you could certainly offer).
3
Speedo. I am new to the field of water cooling.... What is the best way to control the pump, temperature sensor and, fans? What hardware would be best for this? I have something along these lines in mind: EKWB EK-XRES 140 Revo D5 PWM PHOBYA temperature sensor internal/external thread G1/4 black nickel be quiet! Pure Wings 2 120mm (120x120x25mm) (120mm) 3-4 times
2