Best selling Network accessories from LevelOne
This page always stays fresh and updates automatically.
1. LevelOne Converter GVT-2014 10/100/1000T>RJ45 to PSE
The GVT-2014 SMF SC media converter can convert network signals between copper and fiber-based networks. The converter is equipped with a 10/100/1000Base-T RJ-45 port, supports full-duplex and half-duplex switch connectivity, and features automatic detection for 10Base-T, 100Base-TX, and 1000Base-T. When used in multimode with fiber cabling, the network range can be extended up to 20 km. The device has built-in dip switches for easy converter configuration and is based on intelligent LFP (Link Fault Pass-through), allowing the converter to monitor both fiber and copper connections for signal loss, as well as offering cut-through and smart pass-through modes.
The LevelOne GVT-2014 is a single-port, end-span IEEE 802.3at High Power over Ethernet media converter. It is specifically designed to meet the growing power demands of network devices such as PTZ (Pan, Tilt, and Zoom) network cameras, PTZ speed domes, color touchscreen VoIP phones, multi-channel wireless LAN access points, and other network devices that require higher power to operate normally. Equipped with an SC port for Gigabit SC transceivers, it is compatible with multimode fibers. The GVT-2014, with its high Power over Ethernet capability, is the ideal solution for delivering data and power directly through the RJ45 interface to network devices without the need for additional outlets and electrical cables.
2. LevelOne CVH-2000 14-Slot Media Converter Chassis with Redundant Power Supply
14-Slot Media Converter Chassis
The LevelOne CVH-2000 media converter chassis can accommodate up to 14 media converters. The chassis supports the LevelOne FVT-2001/2002/2201/2401 and GVT-2000/2001 media converters. All converters are individually secured in the chassis and can be swapped out during operation for maximum connection reliability.
The dual power supplies ensure continuous network operation. The chassis has the standard size for 19-inch rack mounting and fits easily into a server rack.
- Supports 14 slots for various types of media converters
- Hot-swappable converter module
- Operating temperature range of 10 °C to 55 °C.
Network accessories
EUR196,10
LevelOne CVH-2000 14-Slot Media Converter Chassis with Redundant Power Supply
Media converter
3. LevelOne Converter GVT-2013 10/100/1000T>RJ45 to PSE
The GVT-2013 MMF SC media converter can convert network signals between copper and fiber-based networks. The converter is equipped with a 10/100/1000Base-T RJ-45 port, supports full-duplex and half-duplex switch connectivity, and features automatic detection for 10Base-T, 100Base-TX, and 1000Base-T. When used in multimode with fiber cabling, the network range can be extended up to 500 meters. The device has built-in dip switches for easy converter configuration and is based on intelligent LFP (Link Fault Pass-through), allowing the converter to monitor both fiber and copper connections for signal loss, as well as cut-through and smart pass-through modes.
The LevelOne GVT-2013 is a single-port, end-span IEEE 802.3at High Power over Ethernet media converter. It is specifically designed to meet the growing power demands of network devices, such as PTZ (Pan, Tilt, and Zoom) network cameras and PTZ speed domes.
4. LevelOne PFE-1001R -, 1 x PoE RJ-45
By using hybrid fiber and copper cables, the LevelOne PFE series can deliver power and data over a distance of 2 km to a receiver that provides a powerful PoE output for IP surveillance applications. The robust outdoor series (PFE-1011/1014) offers the same performance in a rugged, waterproof housing rated IP66 for harsh environmental conditions and a temperature range of -40°C to 60°C.
- Extends data and power up to 2 km over a single hybrid fiber cable
- Enables PoE devices at remote locations
- Supports high-power devices (up to 60 W at 450 m connection)
- Flexible installation option - choose between 1 or 4 PoE output receivers
- The outdoor housing protects operation across a wide temperature range (PFE-1011R/1014R)
- Weatherproof models for outdoor use are protected against water and dust (PFE-1011R/1014R).
5. LevelOne POR-0101 PoE Repeater
Level One POR-0101 product features: cable transmission and reception for 10/100 Mbps, power over Ethernet (802.3af/at PoE) to remote devices, extended PoE connection for an additional 100 meters, multiple PoE amplifiers can be used through daisy-chain for range extension, and simple plug-and-play installation with no additional power supply required.
6. LevelOne VDS-1201 Annex-A
The LevelOne VDS-1201 converts data from Ethernet to VDSL, allowing large amounts of data to be transmitted over longer distances. This technology uses standard twisted-pair telephone cables instead of expensive Cat.5 cables.
Why convert Ethernet to VDSL? When using VDSL2 (Very High Speed Digital Subscriber Line) technology, users can transfer data at high speeds up to 250 meters without the need to install additional Ethernet switches or cables. With up to 100 Mbps downstream and 100 Mbps upstream, VDSL2 technology provides sufficient capacity for bandwidth-intensive applications.
Fast data transfer? Yes! Easy installation? Yes! Cost-effective? Yes! The LevelOne VDS-1201 works optimally where traditional copper telephone lines are already installed: in apartments, homes, hotels, university campuses, etc. No expensive Ethernet cables are required, and VDSL technology can be easily integrated into an existing network. The VDS-1201 is plug-and-play capable and requires minimal installation effort.
Custom settings: Each VDS-1201 can operate with custom settings. Using the built-in DIP switches, users can adjust the device to the desired network properties.
Annex A: Additionally provides the option to transmit analog telephone signals in-band with the VDSL2 signal over the two-wire line.
7. LevelOne IEC-2000 10Base-T
The LevelOne IEC-2000 is a versatile media converter designed for converting RJ-45 to SFP (mini-GBIC). It supports various Ethernet standards, including 10Base-T, 100Base-TX, and Gigabit Ethernet, enabling data transmission rates of up to 1 Gbps. This converter is particularly suitable for industrial applications as it complies with NEMA TS1/TS2 standards for traffic control equipment and meets the IEC61000-6-2 standard for industrial environments. The IEC-2000 features DIN rail mounting, making installation in various settings easier. With an SFP slot, users can choose from a range of optical Gigabit modules to enhance network flexibility and adaptability. The DIP switch configuration allows for easy customization to specific network needs, including link fault pass-through and speed and duplex mode settings.
- Supports a variety of Ethernet standards, including 10Base-T and Gigabit Ethernet
- DIP switch configuration for custom network settings
- SFP slot for the use of different optical Gigabit modules
- Complies with NEMA TS1/TS2 and IEC61000-6-2 for industrial applications
- DIN rail mounting for easy installation in various environments.
8. LevelOne 4U, 100 -, 50/60Hz
8-bay media converter chassis
The POC-4001 can accommodate mixed VDS-0200/0201 and VDS-0202 and work with remote VDS-0200/0201 as a central VDSL2 8-port multiplexer.
VDS-0200/0201 are VDSL LAN extenders providing broadband transmission up to 100/60 Mbps for downstream/upstream over a single pair copper line or coaxial cable (VDS-0202) for point-to-point Ethernet connectivity. With a 100/60 Mbps data rate, VDS-0200/0201 supports transmission distances up to 300 meters and 30/10 Mbps for 1 km long-range connection. Users may also select a fixed data rate or a fixed SNR margin for different copper line ranges.
With plug-and-play features and quick installation time, a pair of VDS-0200/0201 offers a cost-effective solution for bandwidth-hungry applications such as video streaming and FTTB over a single twisted pair telephone line or coaxial cable. The POC-4001 allows the VDSL system to grow step by step. This means the system can be plugged in subject to instant demand, and there is no need to pay for the additional hardware in advance. It is a flexible and economical method of investment.
- Accommodates up to 8 VDS-0200/0201/0202 products
- Standard compact 19" 4U chassis mountable for space-saving convenient installation
- Plug-and-play features for easy system expansions
- Two DC electric fans for thermal ventilation
- 250V 2A fuse protection.
9. LevelOne FVT-2001: Media converter RJ45-SC
The FVT-2001 MMF SC media converter is capable of converting network signals between copper and fiber-based networks. The converter features a 10/100Base-TX RJ-45 port, supports connections in full-duplex and half-duplex modes, and has automatic detection for 10Base-T and 100Base-TX. When used with multimode fiber optic cables, it can extend the range of a network up to 2 km.
The device includes built-in dip switches for easy configuration and operates with Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss. It also supports converter transmission methods, the auto-negotiation mode for adjusting copper speed, as well as full-duplex and half-duplex modes.
The FVT-2001 operates at temperatures ranging from -10° to 55° Celsius. It can be used as a standalone unit or as a plug-in module for the CHV-2000 19” converter chassis, which accommodates up to 14 units that can be installed in a central wiring cabinet.
10. LevelOne RJ45 to SC BIDI Fast Ethernet Media Converter Set, Single-Mode Fibre
The LevelOne RJ45 to SC BIDI Fast Ethernet Media Converter Set is a powerful solution for network connectivity over fiber optics. With a maximum data transfer rate of 100 Mbps, this converter enables reliable and efficient data transmission over long distances of up to 20,000 meters. It supports various network standards, including IEEE 802.3, IEEE 802.3u, and IEEE 802.3x, and is compatible with a wide range of Ethernet interfaces. The converter is ideal for applications that require a stable and fast connection, making it suitable for both private and business networks. The integrated LED indicators provide easy monitoring of operational status, while support for various fiber cable diameters allows for flexible installation. The converter is not only functional but also user-friendly, making it an excellent choice for network administrators.
- Maximum transmission distance of up to 20,000 m
- Supports Wavelength Division Multiplexing (WDM)
- Compatible with Auto MDI/MDI-X and Auto-Negotiation
- Supports flow control for optimized network performance
- LED indicators for activity, link, and power.
Network accessories
EUR100,22
LevelOne RJ45 to SC BIDI Fast Ethernet Media Converter Set, Single-Mode Fibre
Media converter
Product order
See all products